Sony SRX-R320 Installation Manual page 25

3. Open the panel (U4) block assembly.
(Refer to steps 1 and 2 in Section 1-1-9.)
4. Loosen the screw (with drop-safe), then rotate the cold
mirror assembly in the direction of the arrow.
5. Loosen the fi ve screws (with drop-safe), then remove
the maintenance cover.
6. Remove the bolt from the anode terminal.
7. Loosen the hexagon socket set screw of the cathode
terminal.
SRX-R320
Cold mirror assembly
Screw
Maintenance cover
(with
drop-safe)
Cold mirror assembly
Fig. 1-8d
Anode terminal
Fig. 1-8e
Panel (U4) block assembly
Screws (with drop-safe)
Screw
(with drop-safe)
Cathode terminal
Hexagon socket
set screw
Bolt
1-19