Sony SRX-R320 Installation Manual page 70

6. Click the "Input C" (LMT-300) radio button in the "INPUT CONTROL" menu.
7. Set Contrast to 90 and Bright to 50 in the "PICTURE CONTROL" menu.
8. Reproduce the Gray 10 of "Sony Color Patch" signal from LMT-300 by Screen Management Control-
ler.
9. Click the "FUNCTION MEMORY" tab of the SRX Controller.
The FUNCTION MEMORY window is displayed.
10. Measure the luminance of screen and adjust the lamp power in the "LAMP POWER" menu so that
the luminance is 16 ft-L.
n
After the CSC adjustment, the luminance is lowered by approximately 2 ft-L.
11. Click the "MAINTENANCE" tab of the SRX Controller.
The MAINTENANCE window is displayed.
"COLOR SPACE CONVERTER"
2-24
[ADJUST] button
menu
Fig. 2-5i
SRX-R320