Solutions To Password Problems; Solution When "The Battery That Saves Your Clock Settings Is Running Low" Message Appears - Epson EB-1985WU User Manual

Multimedia projector

Table of Contents

Solving Projector or Remote Control Operation Problems

• Strong fluorescent lighting, direct sunlight, or infrared device signals

may be interfering with the projector's remote receivers. Dim the lights

or move the projector away from the sun or interfering equipment.

• If available, turn off one of the remote receivers or check if all the

remote receivers were turned off in the Remote Receiver setting in the

projector's Settings menu.

• If the Remote Receiver setting is disabled, hold down the [Menu]

button on the remote control for at least 15 seconds to reset the setting

to its default.

• If you assigned an ID number to the remote control to operate multiple

projectors, you may need to check or change the ID setting (this feature

is not available with all projectors).

• If you lose the remote control, you can order another one from Epson.

Solutions to Password Problems

If you cannot enter or remember a password, try the following solutions:

• You may have turned on password protection without first setting a

password. Try entering 0000 using the remote control.

• If you have entered an incorrect password too many times and see a

message displaying a request code, write down the code and contact

Epson for help. Provide the request code and proof of ownership for

assistance in unlocking the projector.

• If you lose the remote control you cannot enter a password. Order a

new one from Epson.

p.180

p.31

p.90

p.167

p.137

Table of Contents

Eb-1975w Eb-1980wu Eb-1970w