Wireless Network Projection; Installing The Wireless Lan Module - Epson EB-1985WU User Manual

Wireless Network Projection

You can send images to your projector through a wireless network
(EB-1985WU/EB-1975W/EB-1970W). To do this, you must install the
Epson 802.11b/g/n wireless LAN module, and then set up your projector
and computer for wireless projection.
a
If your projector is connected via a LAN cable to a network that
includes a wireless access point, you can connect to the projector
wirelessly using the EasyMP Network Projection software.
There are two ways to connect the projector to your wireless network:
• Using the optional Quick Wireless Connection USB Key (Windows
only)
• Configuring the connection manually using the projector's Network
menus
After installing the module and setting up the projector, install the network
software from the Epson Projector Software CD-ROM or download the
software, as necessary. Use the following software and documentation to set
up and control wireless projection:
• EasyMP Network Projection software sets up your computer for wireless
network projection. See the EasyMP Network Projection Operation Guide
for instructions.
• EasyMP Multi PC Projection software allows you to hold interactive
meetings by projecting the computer screens of users over a network.
See the EasyMP Multi PC Projection Operation Guide for instructions.
Related Links
• "Using the Projector on a Network"
• "Installing the Wireless LAN Module"
• "Using Quick Wireless Connection (Windows Only)"
• "Selecting Wireless Network Settings Manually"
• "Searching for a Wireless Network"
• "Selecting Wireless Network Settings in Windows"
• "Selecting Wireless Network Settings in OS X"
• "Setting Up Wireless Network Security"
p.98
p.102
p.103
p.104
p.106
p.107
p.108
p.108

Installing the Wireless LAN Module

To use the projector over a wireless network, install the Epson 802.11b/g/n
wireless LAN module (EB-1985WU/EB-1975W/EB-1970W). Do not install
any other type of wireless LAN module.
Attention
Never remove the module while its indicator is green or flashing, or while
you are projecting wirelessly. This could damage the module or lose data.
a
Turn off the projector and unplug the power cord.
b
Slide the air filter cover latch and open the air filter cover.
c
Remove the screw securing the wireless LAN module stopper and
remove the stopper.
102