Solving Projector or Remote Control Operation Problems
g g Related Links
• "Remote Control Operation"
p.39
• "Projector Installation Settings - Installation Menu"
• "Installing Batteries in the Remote Control"
• "Selecting the Projector You want to Operate"
Solutions to Password Problems
If you cannot enter or remember a password, try the following solutions:
• If you have entered an incorrect password too many times and see a
message displaying a request code, write down the code and contact Epson
for help. Provide the request code and proof of ownership for assistance in
unlocking the projector.
• If you lose the remote control you cannot enter a password. Order a new
one from Epson.
Attention
If you perform Reset All or Reset Network Settings in the projector's menu, all of
the passwords that have been set for the Network menu are also reset and you
need to set them again. To prevent the passwords from being reset by
unauthorized users, set Network to On in the Menu Protection menu.
Solution When "The Battery that Saves Your Clock
Settings is Running Low" Message Appears
If the message "The battery that saves your clock settings is running low." is
displayed, contact Epson for help.
p.186
p.38
p.112
240