Using Esc/Vp21 Commands; Esc/Vp21 Command List; Cable Layouts - Epson EB-1985WU User Manual

Using ESC/VP21 Commands

You can control the projector from an external device using ESC/VP21.
Related Links
• "Monitoring and Controlling the Projector"
• "ESC/VP21 Command List"
• "Cable Layouts"
p.122

ESC/VP21 Command List

When the power ON command is transmitted to the projector, the power
turns on and it enters warm-up mode. When the projector's power has
turned on, a colon ":" (3Ah) is returned.
When a command is input, the projector executes the command and
returns a ":", and then accepts the next command.
If the command being processed terminates abnormally, an error message is
output and a ":" is returned.
The following commands are available.
Item
Power ON/OFF On
Off
Signal selection Computer1
Computer2
HDMI1/MHL
HDMI2
Video
p.115
p.122
Command
PWR ON
PWR OFF
Auto SOURCE 1F
RGB SOURCE 11
Component SOURCE 14
Auto SOURCE 2F
RGB SOURCE 21
Component SOURCE 24
SOURCE 30
SOURCE A0
SOURCE 41
Item
USB Display
USB
LAN
Screen Mirroring
A/V Mute On/ On
Off
Off
Add a Carriage Return (CR) code (0Dh) to the end of each command and
transmit.
Contact Epson for more details.
Related Links
• "Using ESC/VP21 Commands "

Cable Layouts

Serial connection
• Connector shape: D-Sub 9-pin (male)
• Projector input port name: RS-232C
• Cable type: Crossover (null modem) cable
In the following illustration, the projector side is shown on the left, and the
computer side on the right:
Command
SOURCE 51
SOURCE 52
SOURCE 53
SOURCE 56
MUTE ON
MUTE OFF
p.122
122