Epson EB-1925W User Manual
  1. Manuals
  2. Brands
  3. Epson Manuals
  4. Projector
  5. EB-1910
  6. User manual

Epson EB-1925W User Manual

Multimedia projector
Hide thumbs Also See for EB-1925W:
Table of Contents

Advertisement

Quick Links

User's Guide

Advertisement

Table of Contents
loading

Related Manuals for Epson EB-1925W

Summary of Contents for Epson EB-1925W

  • Page 1 User’s Guide...

  • Page 2: Notations Used In This Guide

    Notations Used in This Guide • Safety indications The documentation and the projector use graphical symbols to show how to use the projector safely. Please understand and respect these caution symbols in order to avoid injury to persons or property. Warning This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling.

  • Page 3: Table Of Contents

    Control Panel (EB-1925W/1915)........16...
  • Page 4 Problems relating to images........87 Network Menu (EB-1925W/1915 Only)....... . 60 Problems when projection starts.
  • Page 5 Communications protocol........123 Setup (EB-1925W/1915 Only)....... 107 About Network Projector (EB-1925W/1915 Only).

  • Page 6: Introduction

    Introduction This chapter explains the projector's features and the part names.

  • Page 7: Projector Features

    You can stop and resume projection easily by opening and closing the A/V mute slide which makes giving clear presentations easier. Enlarge and project your files with the Document Camera (EB-1925W/1920W/1915/1910/1830 only) • A single foot design means you do not have to make any difficult leveling adjustments A USB compatible Document Camera (ELPDC06) is available as an You can easily make height adjustments with one lever.

  • Page 8: Eb-1925W/1915 Features

    Projector Features Taking full advantage of a network connection EB-1925W/1915 Features You can make effective use of your network by using the supplied "EPSON Projector Software for Meeting & Presentation" to perform Set up for presentations in no time efficient and varied presentations and meetings.

  • Page 9: Eb-1920W/1910/1830 Features

    Projector Features EB-1920W/1910/1830 Features Taking full advantage of a network connection You can make effective use of your network by using the supplied "EPSON Projector Software for Meeting & Monitoring" and collectively manage the projectors in different meeting rooms. • Screen transfer using the network (EasyMP Network Projection) You can project by connecting to an already constructed network system.

  • Page 10: Part Names And Functions

    Name Function Front/Top Remote Receiver Receives signals from the remote control.s Quick Start The illustration is that of EB-1925W/1915. Guide Takes measurements when the projector automatically Sensor From here on, all features will be explained using illustrations of corrects the projected image.

  • Page 11: Rear (Eb-1925W/1915)

    (EB-1925W/1915 only) s Quick Start Guide The following explains the status of any USB device USB indicator connected to USB1 port (EB-1925W/1915 only) or USB(TypeA) port (EB-1920W/1910/1830 only). OFF: USB device is not connected Orange Light ON: USB device is connected...
  • Page 12 Connects a USB storage device or a digital camera, and USB1 port projects images, movie files, and scenarios using PC Free. Projector Operation Guide (EB-1925W/1915) USB2 port Connect the optional Document Camera (ELPDC06) here. This is a dedicated port for the Document Camera, and does not support other devices.

  • Page 13: Rear (Eb-1920W/1910/1830)

    Part Names and Functions Name Function Rear (EB-1920W/1910/1830) Remote Receiver Receives signals from the remote control.s Quick Start Guide The Security slot is compatible with the Microsaver Security slot Security System manufactured by Kensington.s p.50 Takes in air to cool the projector internally. Air intake vent If dust collects here it can cause the internal temperature to rise, and this can lead to problems with operation and...

  • Page 14: Rear (Eb-1900)

    Part Names and Functions Name Function Rear (EB-1900) Computer2 Input Port For video signals from a computer and component video signals from other video sources. Audio2 Port Connects to the audio out port when you want to output audio from equipment connected to the Computer2 Input Port.s Quick Start Guide Also, when inputting audio from an audio source that is different from the image source, connect it to Audio2 port.

  • Page 15: Base

    Part Names and Functions Name Function Base USB(TypeB) port Connects the projector to a computer via the USB cable, and the image on the computer is projected.s p.115 Also use this port to connect to a computer via the USB cable to use the wireless mouse function.s p.40 For video signals from a computer and component...

  • Page 16: Control Panel (Eb-1925W/1915)

    Position to project the optimum image. When a Configuration Menu or a Help screen is displayed, it accepts and enters the current selection and Control Panel (EB-1925W/1915) moves to the next level. Use these buttons to correct keystone distortions in ][v/ vertical directions.

  • Page 17: Control Panel (Eb-1920W/1910/1830)

    Part Names and Functions Name Function Name Function [Menu] button Displays and closes the Configuration Menu.s p.52 Use these buttons to perform keystone correction. ][v/ However, these buttons only have the [ buttons functions while projecting in Slideshow. If pressed when a Configuration Menu or a Help screen Control Panel (EB-1920W/1910/1830) is displayed, these buttons select menu items and setting values.s p.52,...

  • Page 18: Control Panel (Eb-1900)

    Part Names and Functions Name Function Control Panel (EB-1900) [Help] button Displays and closes the Help screen which shows you how to deal with problems if they occur.s p.82 Stops the current function. [Esc] button If pressed when a Configuration menu is displayed, it moves to the previous menu level.s p.52 If pressed when a Configuration Menu or a Help screen...

  • Page 19: Remote Control

    • Use when entering numbers in the Network menu from the Configuration menu. (EB-1925W/1920W/ 1915/1910/1830 only) Turns the video and audio on or off. (EB-1925W/1920W/ [A/V Mute] button 1915/1910/1830 only) If using EB-1900, the image is turned on or off.
  • Page 20 (EB-1925W/1920W/ 1915/1910/1830 only) Caution • When projecting images using PC Free (EB-1925W/ 1915 only) or Slideshow (EB-1920W/1910/1830 only), Do not start at high volume. pressing these buttons displays the previous/next A sudden excessive volume may cause loss of hear- screen.
  • Page 21 Part Names and Functions Name Function [Focus] buttons Adjusts the image focus. (EB-1925W/1915 only) [l][r] s Quick Start Guide When using EB-1920W/1910/1900/1830, this does not function even if the button is pressed. [LAN] button Changes to the image projected with EasyMP Network Projection.

  • Page 22: Useful Functions

    Useful Functions This chapter explains useful tips for giving presentations, and the Security functions.

  • Page 23: Correcting The Projected Image Using Screen Fit

    Correcting the Projected Image Using Screen Fit (EB-1925W/1915 Only) This projector (EB-1925W/1915) is equipped with the following two The following are the conditions for correcting the projected image functions for automatically correcting the projected image. using Screen Fit. • Auto H/V-Keystone Screen size: less than or equal to 100"...
  • Page 24 Correcting the Projected Image Using Screen Fit (EB-1925W/1915 Only) Adjust the Zoom ring so that the projected area (defined by Procedure outer white border line) is bigger than the screen frame. Press the [Screen Fit] button on the remote control or the control panel.
  • Page 25 Correcting the Projected Image Using Screen Fit (EB-1925W/1915 Only) After the correction is performed, the following message • Screen Fit corrects the projected image when it detects two or appears. To exit the correction menu, press the [Esc button] more sides inside the projected area, and aligns with the detected on the remote control or the control panel to clear the frame.

  • Page 26: Correcting Distortions In The Projected Image Using Quick Corner (Eb-1925W/1915 Only)

    Correcting Distortions in the Projected Image Using Quick Corner (EB-1925W/1915 Only) This projector (EB-1925W/1915) provides two ways to correct distortion in projected images as below. • H/V-Keystone This allows you to manually correct distortion in the horizontal and vertical directions independently. H/V-Keystone correction is ideal for fine-tuning Keystone distortion.
  • Page 27 Correcting Distortions in the Projected Image Using Quick Corner (EB-1925W/1915 Only) Using the [ ], [ ], [ ], and [ ] buttons on the remote control, or the [ ], [ ], [ ], and [ ] buttons on the control panel, correct the position of the corner.
  • Page 28 Correcting Distortions in the Projected Image Using Quick Corner (EB-1925W/1915 Only) When you are done, press the [Esc] button to exit the • In the Settings menu - Keystone of the Configuration correction menu. menu, when you have set Auto H/V-Keystone to On, Since Keystone in the Configuration menu has been changed to the message "Do you want to perform Auto H/...

  • Page 29: Changing The Projected Image

    You can change the projected image in the following two ways. HDMI (EB-1925W/1915only) • Changing by Source Search USB Display USB1 (EB-1925W/1915 only)/ The projector automatically detects signals being input from connected equipment, and the image being input from the equipment is projected. USB (EB-1920W/1910/1830 only) USB2 (EB-1925W/1915 only) •...

  • Page 30: Switch To The Target Image By Remote Control

    [Source Search] button until the target image is projected. Each time the button is pressed, the image changes from the Computer1 input port to the Computer2 input port. (EB-1925W/1920W/ 1915/1910/1830 only) The following screen showing the status of image signals is When using EB-1900, it changes to images from the Computer input port.

  • Page 31: Functions For Enhancing Projection

    Functions for Enhancing Projection Procedure Selecting the Projection Quality (Selecting Color Mode) Remote Control You can easily obtain the optimum image quality simply by selecting the setting that best corresponds to your surroundings when projecting. The brightness of the image varies depending on the mode selected. Mode Application Dynamic...

  • Page 32: Setting The Auto Iris

    Functions for Enhancing Projection Setting the Auto Iris Auto Iris can be set only when the Color Mode is Dynamic, Theatre, or Customized. By automatically setting the luminance according to the brightness of the displayed image, it lets you enjoy deep and rich images. Hiding the Image and Sound Temporarily (A/V Procedure Mute)

  • Page 33: Freezing The Image (Freeze)

    Functions for Enhancing Projection • If you use this function when projecting moving images, the Procedure images and sound continue to be played back by the source, and you cannot return to the point where A/V Mute was activated. Remote Control •...

  • Page 34: Changing Methods

    * When a 720p/1080i signal is input, the display is in a zoomed 4:3 format (the image is cut off on the right and left sides). EB-1925W/1920W Each time the button is pressed, it changes in the order Normal or Auto, 16:9, Full, Zoom, and Native.

  • Page 35: Changing The Aspect For Computer Images (Eb-1915/1910/1900/1830)

    Functions for Enhancing Projection Changing the aspect for computer images (EB-1915/1910/1900/1830) When projecting images input from Computer input port (EB-1900 only), Computer1/2 input port (EB-1915/1910/1830 only), or HDMI input port (EB-1915 only), you can change the aspect as follows. Set Values Operation Projection example Projects to the full projection size retaining the Aspect of...

  • Page 36: Changing The Aspect For Computer Images (Eb-1925W/1920W)

    Changing the Aspect for computer images (EB-1925W/1920W) When projecting images from Computer1/2 input port or HDMI input port (EB-1925W only), you can change the Aspect as follows. EB-1925W/1920W offers WXGA 1280x800 resolution (Aspect Ratio 16:10). When projecting onto 16:9 screens, set the Aspect to 16:9.
  • Page 37 Functions for Enhancing Projection Set Values Operation Projection example Zoom Projects the input image at the lateral direction aspect size When a 1024 x 768 signal is input as it is. Parts that extend beyond the projection size are not projected.

  • Page 38: Pointer Function (Pointer)

    Functions for Enhancing Projection Move the Pointer icon ( Pointer Function (Pointer) Remote Control This allows you to move a Pointer icon on the projected image, and helps you draw attention to the area you are talking about. Procedure When pressed in conjunction with the adjacent [ Display the Pointer.

  • Page 39: Enlarging Part Of The Image (E-Zoom)

    Functions for Enhancing Projection Enlarging Part of the Image (E-Zoom) Move the ( ) to the area of the image that you want to enlarge. This is useful when you want to expand images to see them in greater Remote Control detail, such as graphs and tables.

  • Page 40: Operating The Mouse Pointer By Remote Control (Wireless Mouse)

    Macintosh: Mac OS X 10.3 to 10.5 • The Wireless Mouse function can be used only when the source is Computer1, Computer2, or HDMI (EB-1925W/1915 only). For EB-1900, it can be used only when the source is Computer. • When projecting in USB Display, you can only page up and down.
  • Page 41 Functions for Enhancing Projection Once the connection has been made, the mouse pointer can be operated • When pressed in conjunction with the adjacent [ as follows. ], [ ], and [ ] buttons, the pointer can be moved Moving the mouse pointer Mouse clicks diagonally.

  • Page 42: Limitation Of The Number Of The Target Projectors When Using Multiple Projectors

    Limitation of the Number of the Target Projectors when Using Multiple Projectors When an ID is set for the projector and the remote control, you can Opera- Combinations Descriptions use the remote control to operate only the projector with a matching tion ID.

  • Page 43: Setting The Remote Control Id

    Limitation of the Number of the Target Projectors when Using Multiple Projectors Choose the ID you want to set and press the [Enter] button. Setting the Remote Control ID Set the ID on the remote control each time you switch the projector power on.
  • Page 44 Limitation of the Number of the Target Projectors when Using Multiple Projectors While holding the [ID] button, press a number button to select a number to match the ID of the projector you want to operate. Numeric buttons Keep pressed Once this setting has been made, the projector that can be operated by the re- mote control is limited.

  • Page 45: Correcting Color For Multiple Projectors

    Correcting Color for Multiple Projectors (Multi-Screen Color Adjustment) When multiple projectors are lined up and projecting images, you can Procedure correct the brightness and color tone of each projector's image with multi-screen color adjustment so that the colors of images from each Press the [Menu] button and select Extended - Multi-screen projector match closely.
  • Page 46 Correcting Color for Multiple Projectors (Multi-Screen Color Adjustment) Correct the Color Correct. (G/R) and Color Correct. (B/Y) settings. Because each time the [Enter] button is pressed the image displayed changes between the pattern display and the actual image, you can check the correction results and make corrections in the actual image.

  • Page 47: Security Functions

    Display in the Configuration Menu. • Anti-Theft Lock 3. Network Protect (EB-1925W/1920W/1915/1910/1830 only) When Network Protect is set to On setting changes for Network Menu in the The projector is equipped with various types of anti-theft security devices.

  • Page 48: Entering The Password

    Select On, and then press the [Enter] button. Press the [Return] button. When the Password entry screen is displayed, enter the Password using the numeric buttons on the Remote Control. Turn on Network Protect.(EB-1925W/1920W/1915/1910/1830 only) Procedure Select Network Protect, and then press the [Enter] button.

  • Page 49: Restricting Operation (Control Panel Lock)

    Security Functions Procedure Attention • If an incorrect password is entered three times in succession, the message During projection, press the [Menu] button and select "The projector's operation will be locked." is displayed for about five minutes, and then the projector switches to standby mode. If this happens, Settings - Control Panel Lock from the Configuration Menu.

  • Page 50: Anti-Theft Lock

    Security Functions Anti-Theft Lock You can release the Control panel lock by one of the following two methods. As the projector is often setup on ceiling mounts and left in rooms • From the Remote Control, select Off in Settings - Control Panel unattended, the projector includes the following security devices to Lock from the Configuration Menu.

  • Page 51: Configuration Menu

    Configuration Menu This chapter explains how to use the Configuration Menu and its functions.

  • Page 52: Using The Configuration Menu

    Using the Configuration Menu Selecting from the top menu Selecting from the sub menu Changing the selected item Exit...

  • Page 53: List Of Functions

    List of Functions Image Menu Items that can be set vary depending on the image signal and Source currently being projected as shown in the following screen shots. Setting details are saved for each image signal. Depending on the model used, some input sources are not supported. p.29 RGB Signal/USB Display/USB1/USB2/USB/LAN Component Video...

  • Page 54: Signal Menu

    You cannot make settings on the Signal menu when the source is USB Display, USB1, USB2, USB, or LAN. Computer/Computer1/ Computer/Computer1/ S-Video/Video HDMI (EB-1925W/1915only) Computer2 Computer2 (when RGB signal is input) (when component video signal is input) Sub Menu Function You can select whether or not (On/Off) Auto Setup automatically adjusts the image to the optimum state when the Input Signal changes.s...
  • Page 55 (This cannot be set when a digital RGB signal is input) HDMI Video Range (EB-1925W/1915 only) When the projector's HDMI input port is connected to a DVD player and so on, the projector's video range is set according to the DVD player's video range setting.

  • Page 56: Settings Menu

    List of Functions Settings Menu EB-1925W/1915 EB-1920W/1910/1830 EB-1900 Sub Menu Function You can correct keystone distortion. Keystone (EB-1925W/1915) H/V-Keystone: Corrects horizontal and vertical keystone distortion. Select one of V-Keystone or H-Keystone. If you set Auto H/V-Keystone to On, distortions and focus of the projected image are automatically corrected when the projector is moved.(Only when Front is selected for Extended - Projection) When set to Off, adjust the projected image manually.s Quick Start Guide...
  • Page 57 When the projector is setup, a Test Pattern is displayed so that you can adjust the projection without connecting other equipment. While the test Test Pattern pattern is displayed, you can perform Quick Corner (EB-1925W/1915 only), Adjust Zoom, Adjust Focus, and Keystone. To cancel the Test Pattern, press the [Return] button on the Remote Control or the Control panel.

  • Page 58: Extended Menu

    List of Functions Extended Menu EB-1925W/1920W/1915/1910/1830 EB-1900 Sub Menu Function You can make settings related to the projector's display. Display Messages: When set to Off, the following items will not be displayed. The name of the current selection when changing the Source, Color Mode or Aspect; a message when no image signal is input;...
  • Page 59 List of Functions Sub Menu Function Operation Direct Power On: You can set whether or not (On/Off) to enable Direct Power On. When it is set to On and the power cable is plugged in, be aware that the projector turns on automatically in case such as a power outage is restored.

  • Page 60: Network Menu (Eb-1925W/1915 Only)

    List of Functions Network Menu (EB-1925W/1915 Only) When Network Protect is set to On in Password Protect, a message is displayed and the network settings cannot be changed. Turn Network Protect Off and then configure the network. p.47 Sub Menu Function You can confirm the setting status for each network as follows.

  • Page 61: Notes On Operating The Network Menu

    List of Functions buttons. After inputting, press [Finish] on the keyboard to confirm your Notes on operating the Network menu input. Press [Cancel] on the keyboard to cancel your input. Selecting from the top menu and sub menus, and changing of selected items are the same as operations in the Configuration Menu.

  • Page 62: Basic Menu

    Network.s Projector Operation Guide "Changing Settings Using a Web Browser (Web Control)"(EB-1925W/1915) Projector keyword When set to On, you have to enter the Keyword when you try to connect the projector to a computer on a Network. As a result, you can prevent presentations from being interrupted by unscheduled connections from the computer.

  • Page 63: Wireless Lan Menu (Only When The Supplied Or Optional Wireless Lan Unit Is Inserted)

    List of Functions Wireless LAN menu (only when the supplied or optional Wireless LAN unit is inserted) Sub Menu Function Turn On when connecting the projector to the computer over wireless LAN. Wireless LAN Power If you do not want to connect via wireless LAN, turn it Off to prevent unauthorized access by others. This is set to On by default. Connection mode When the projector is connected to a computer with EasyMP Network Projection, set so that it is in a permanently connected mode.

  • Page 64: Security Menu (Available When The Supplied Or Optional Wireless Lan Unit Is Inserted)

    List of Functions Sub Menu Function MAC Address Displays the MAC address. To prevent the SSID from being displayed on the LAN Standby screen, set this to Off. SSID Display To prevent the IP Address from being displayed on the LAN Standby screen, set this to Off. IP Address Display Security menu (available when the supplied or optional Wireless LAN unit is inserted) Sub Menu...
  • Page 65 List of Functions Type of security When the supplied or optional wireless LAN unit is installed and being used in Advanced Connection Mode, it is strongly recommended that you set security. Select one of the following security methods. • WEP Data is encrypted with a code key (WEP key).

  • Page 66: When Wep Is Selected

    • Save the electronic certificate and the CA certificate onto a USB storage device and register them to the projector with PC Free. Only one pair of electronic certificate and CA certificate can be registered to the projector. These certificates are used with EAP-TLS.s Projector Operation Guide (EB-1925W/ 1915) When WEP is selected...

  • Page 67: When Wpa-Psk(Tkip/Aes) Or Wpa2-Psk(Tkip/Aes) Is Selected

    List of Functions Sub Menu Function Encryption key 1/ You can enter the key used for WEP encryption. Enter the key in single-byte characters following instructions from the network administrator for Encryption key 2/ the network in which the projector participates. The type of character and the number that can be entered differ according to the WEP encryption Encryption key 3/ and Format settings.

  • Page 68: When Eap-Tls Is Selected

    List of Functions When EAP-TLS is selected Sub Menu Function Issued by/Issued to/Validity Information in the certificate is displayed. You cannot enter. period When EAP-TTLS/MD5, EAP-TTLS/MS-CHAPv2, PEAP/MS-CHAPv2, PEAP/GTC, LEAP, EAP-Fast/MS-CHAPv2, EAP-Fast/GTC is selected Sub Menu Function User name You can enter a user name to be used for authentication in single-byte alphanumeric characters (no spaces). You can enter up to 32 characters. You can enter a password to use for authentication in single-byte alphanumeric characters.

  • Page 69: Mail Menu

    List of Functions Sub Menu Function Subnet Mask You can input the subnet mask for the projector. You can enter a number from 0 to 255 in each field of the address. However, the following Subnet Masks cannot be used. 0.0.0.0, 255.255.255.255 You can input the IP address for the gateway for the projector.

  • Page 70: Others Menu

    List of Functions Sub Menu Function Setting a Notification Event You can select the problems or warnings to be notified about by e-mail. When the selected problem or warning occurs in the projector, an e-mail is sent to the specified Destination address notifying that a problem or warning has occurred. You can select multiple items from the displayed items. Others Menu Sub Menu Function...

  • Page 71: Reset Menu

    List of Functions Reset menu Resets all of the network settings. Sub Menu Function Reset network settings. To reset all of the Network settings, select Yes. After you Reset all the settings, the Basic menu appears.

  • Page 72: Network Menu (Eb-1920W/1910/1830 Only)

    List of Functions Network Menu (EB-1920W/1910/1830 Only) When Network Protect is set to On in Password Protect, a message is displayed and the network settings cannot be changed. Turn Network Protect Off and then configure the network. p.47 Sub Menu Function You can confirm the setting status for the network as follows.

  • Page 73: Notes On Operating The Network Menu

    List of Functions Notes on operating the Network menu Selecting from the top menu and sub menus, and changing of selected items are the same as operations in the Configuration Menu. When done, make sure you go to the Setup complete menu, and select one of Yes, No, or Cancel.

  • Page 74: Basic Menu

    List of Functions Basic menu Sub Menu Function Displays the projector name used to identify the projector when connected to a network. Projector Name When editing, you can enter up to 16 single-byte alphanumeric characters. Set a Password to use when you access the projector using compatible PJLink software.s p.125 PJLink Password You can enter up to 32 single-byte alphanumeric characters.

  • Page 75: Wired Lan Menu

    List of Functions Wired LAN menu Sub Menu Function IP Settings You can make network settings. DHCP: Select whether or not (On/Off) to use DHCP . If this is set to On you cannot set any more addresses. IP Address: You can input the IP Address assigned to the projector.

  • Page 76: Mail Menu

    List of Functions Mail menu When this is set, you receive an e-mail notification if a problem or warning occurs in the projector. For information on the contents of the sent Mail, "Reading Problem Mail Notification Function (EB-1925W/1920W/1915/1910/1830 Only)" p.121 Sub Menu Function You can set whether or not (On/Off) to be notified by e-mail.

  • Page 77: Others Menu

    List of Functions Others menu Sub Menu Function You can register up to two IP addresses for the SNMP trap notification destination. Trap IP Address 1 Trap IP Address 2 You can enter a number from 0 to 255 in each field of the address. However, the following IP Addresses cannot be used.

  • Page 78: Reset Menu

    List of Functions Reset menu Resets all of the network settings. Sub Menu Function To reset all of the Network settings, select Yes. Reset network settings. After you Reset all the settings, the Basic menu appears.

  • Page 79: Info Menu (Display Only)

    List of Functions Info Menu (Display Only) Lets you check the status of the image signals being projected and the status of the projector. Items that can be displayed vary depending on the Source currently being projected as shown in the following screen shots. Depending on the model used, some input sources are not supported. p.29 Computer/Computer1/ S-Video/Video...

  • Page 80: Reset Menu

    The following items are not reset to their defaults: Input Signal, User's Logo, all items for Network menus , Lamp Hours, and Language. Reset Lamp Hours You can clear the cumulative Lamp Hours use time, and return it to "0H". Reset when you replace the Lamp. * (EB-1925W/1920W/1915/1910/1830 only)

  • Page 81: Troubleshooting

    Troubleshooting This chapter explains how to identify problems and what to do if a problem is found.

  • Page 82: Using The Help

    Using the Help If a problem occurs with the projector, the Help screen is displayed to Confirm the selection. assist you by pressing the Help button. You can solve problems by Using the Remote Control Using the Control panel answering the questions. Procedure Press the [Help] button.

  • Page 83: Problem Solving

    Problem Solving If you are having a problem with the projector, first check the projector's indicators and refer to "Reading the Indicators" below. If the indicators do not show clearly what the problem might be, refer to "When the Indicators Provide No Help". p.86 Reading the Indicators The projector is provided with the following three indicators that indicate the operating status of the projector.

  • Page 84: Indicator Is Lit Or Flashing Red

    Problem Solving If all indicators are off, check that the power cable is connected correctly and that the power is being supplied normally. Sometimes, when the power cable is unplugged, the indicator remains lit for a short period, but this is not a fault. Indicator is lit or flashing red : Lit : Flashing...

  • Page 85: M O Indicator Is Lit Or Flashing Orange

    Problem Solving Status Cause Remedy or Status When using at an altitude of 1500 m or more, set High Altitude Mode to On. s p.58 Auto Iris Error Stop using the projector, disconnect the power cable from the electrical outlet, and contact your local dealer or the nearest address provided in the Support and Service Guide.

  • Page 86: When The Indicators Provide No Help

    "I want to change the language for messages and menus" p.92 projection area is completely blue, and so on. • • "Mail is not received even if a problem occurs in the projector (EB-1925W/ "Moving images are not displayed (only the moving image portion turns black)" p.87 1920W/1915/1910/1830)"...

  • Page 87: Problems Relating To Images

    Problem Solving Problems relating to images No images appear Check Remedy Did you press the [t] button? Press the [t] button to turn the power on. Are the indicators switched off? The power cable is not connected correctly or power is not being supplied normally. Connect the projector's power cable correctly.s Quick Start Guide Check that your electrical outlet or power source is functioning correctly.

  • Page 88: The Message "Not Supported." Is Displayed." S

    If you are using the projector with this setting off, manually adjust the projected image.s Quick Start Guide Is the focus adjusted correctly? Adjust the focus using the [Focus buttons] (EB-1925W/1915 only) or Focus ring (EB-1920W/1910/1900/1830 only). s Quick Start Guide...

  • Page 89: Interference Or Distortion Appear In Images" S

    Problem Solving Check Remedy Is the projector at the correct distance? Is it projecting outside of the recommended projection distance range? Setup within the recommended range.s p.111 Is the Keystone adjustment value too large? Lower the projection angle to reduce the amount of keystone correction.s Quick Start Guide Has condensation formed on the lens? If the projector is suddenly taken from a cold environment to a warm environment, or if sudden ambient temperature changes occur, condensation may form on the surface of the lens, and this may cause the images to...

  • Page 90: Image Colors Are Not Right" S

    Problem Solving Check Remedy Is Position adjusted correctly? Press the [Auto] button on the Remote Control or the [Enter] button on the Control panel to perform automatic adjustment of the computer image being projected. If the images are not adjusted correctly after using automatic adjustment, you can make the adjustments using Position from the Configuration Menu.

  • Page 91: Problems When Projection Starts

    When the Lamp is nearly ready for replacement, the images become darker and the color quality becomes poorer. When this happens, replace the Lamp with a new lamp.s p.99 Nothing appears on the external monitor (EB-1925W/1920W/1915/1910/1830 only) Check Remedy Are images input from a port other than the Computer1 input port? The only images that can be displayed on an external monitor are computer images from the Computer1 input port.

  • Page 92: Other Problems

    When using a commercially available audio cable, make sure it is labeled "No resistance". Is it connected with an HDMI cable? (EB-1925W/1915 only) If no audio is output when connecting via an HDMI cable, set the connected equipment to PCM output.

  • Page 93: Mail Is Not Received Even If A Problem Occurs In The Projector (Eb-1925W/ 1920W/1915/1910/1830)" S

    Problem Solving Mail is not received even if a problem occurs in the projector (EB-1925W/1920W/1915/1910/1830) Check Remedy Is Standby Mode set to Communication On? To use the Mail Notification function when the projector is in standby, set Communication On in Standby Mode from the Configuration Menu.

  • Page 94: Appendix

    Appendix This chapter provides information on maintenance procedures to ensure the best level of performance from the projector for a long time to come.

  • Page 95: Installation Methods

    Installation Methods • Suspend the projector from the • Suspend the projector from the The projector supports the following four different projection methods. Install according to the conditions of the installation location. ceiling and project images from ceiling and project images from in front of a screen (Front/Ceil- behind a translucent screen.

  • Page 96: Cleaning

    Cleaning You should clean the projector if it becomes dirty or if the quality of Cleaning the Lens projected images starts to deteriorate. Use a commercially available cloth for cleaning glasses to gently wipe Attention the lens. Turn off the projector's power before cleaning. Warning Do not use sprays that contain flammable gas to remove dust and lint from Cleaning the Projector's Surface...

  • Page 97: Cleaning The Air Filter

    Cleaning Cleaning the Air filter Clean the air filter and the Air intake vent when the following message is displayed. "The projector is overheating. Make sure nothing is blocking the air vent, and clean or replace the air filter." Attention •...

  • Page 98: Replacing Consumables

    Replacing Consumables This section explains how to replace the Remote Control batteries, the Lamp, and the air filter. Replacing the Remote Control Batteries If delays in the responsiveness of the Remote Control occur or if it does not operate after it has been used for some time, it probably means that the batteries are becoming flat.

  • Page 99: Replacing The Lamp

    Replacing Consumables Replacing the Lamp Attention • The lamp replacement message is set to appear after the following time periods in order to maintain the initial brightness and quality of the Lamp replacement period projected images. p.56 When Power Consumption is set to Normal: About 2400 hours It is time to replace the Lamp when: When Power Consumption is set to ECO: About 3400 hours •...
  • Page 100 Replacing Consumables Caution Wait until the Lamp has cooled down sufficiently before removing the Lamp cover. If the lamp is still hot, burns or other injuries may result. It takes about one hour after the power has been turned off for the Lamp to be cool enough.
  • Page 101 Replacing Consumables Take out the old Lamp by pulling the handle. If the Lamp is cracked, replace it with a new lamp, or contact your local dealer for further advice. Epson Projector Contact List Replace the Lamp cover. Install the new Lamp. Insert the new Lamp along the guide rail in the correct direction so that it fits in place, push in firmly, and once it is fully inserted tighten the two screws.

  • Page 102: Resetting The Lamp Hours

    Replacing Consumables Resetting the lamp hours Open the air filter cover. Push the latch in the direction of the triangle to open the air The projector records how long the lamp is turned on and a message filter cover. The air filter cover gets temporarily fixed in place at and indicator notify you when it is time to replace the lamp.
  • Page 103 Replacing Consumables Install the new air filter. Push in the air filter until it clicks into place. Close the air filter cover. Push in the air filter cover until it clicks into place. Dispose of used air filters properly in accordance with your local regulations.

  • Page 104: Optional Accessories And Consumables

    Use when connecting the projector to a computer wirelessly and projecting. vary depending on the country of purchase. Quick Wireless Connection USB Key ELPAP06 (EB-1925W/1920W/ 1915/1910/1830only) Use when you want to quickly establish one-to-one connection between the Optional accessories projector and a computer with Windows installed and project images.

  • Page 105: Saving A User's Logo

    Saving a User's Logo You can save the image that is currently being projected as a User's Logo. • If User's Logo Protect from Password Protect is set to On, a message is displayed and the user's logo cannot be changed. You Once a User's Logo has been saved, the logo cannot be returned can make changes after setting User's Logo Protect to Off.
  • Page 106 Saving a User's Logo Select the zoom factor from the zoom setting screen. When the message "Save this image as the User's Logo?" is displayed, select Yes. The image is saved. After the image has been saved, the message "Completed." is displayed. Using the Remote Control Using the Control panel •...

  • Page 107: Connecting To A Wireless Lan Access Point Using Wi-Fi Protected Setup (Eb-1925W/1915 Only)

    Connecting to a Wireless LAN Access Point Using Wi-Fi Protected Setup (EB-1925W/1915 Only) There are two methods for setting Wi-Fi Protected Setup. Select Wireless LAN - To Setup Wizard. • Push Button Method SSID and security are set automatically when the [Enter] button is pressed on the projector's control panel and the dedicated button on the access point equipment.

  • Page 108: Connecting Using The Push Button Method

    Connecting to a Wireless LAN Access Point Using Wi-Fi Protected Setup (EB-1925W/1915 Only) Press the button on the access point when prompted by the Connecting Using the Push Button Method screen. Procedure Select Push Button Method. This completes the setup.

  • Page 109: Connecting Using The Pin Code Method

    Connecting to a Wireless LAN Access Point Using Wi-Fi Protected Setup (EB-1925W/1915 Only) Select Setup complete - Yes. Connecting Using the PIN Code Method Before you can make a connection using the PIN Code Method, a connection must have already been setup between the computer and the access point.
  • Page 110 Connecting to a Wireless LAN Access Point Using Wi-Fi Protected Setup (EB-1925W/1915 Only) Enter the PIN code displayed on the PIN Code Method When the message "Setup by Wi-Fi Protected Setup screen from the computer to the access point, and then complete.”...

  • Page 111: Screen Size And Projection Distance

    Screen Size and Projection Distance Projection Distance (EB-1925W/1920W) 16:9 Screen size Minimum (Wide) to Maximum (Tele) 30" 66x37 94 - 154 40" 89x50 127 - 207 50" 110x62 160 - 260 60" 130x75 193 - 313 80" 180x100 258 - 419 100"...

  • Page 112: Projection Distance (Eb-1915/1910/1900/1830)

    Screen Size and Projection Distance 16:10 Screen size 4:3 Screen size Minimum (Wide) to Maximum Minimum (Wide) to Maximum (Tele) (Tele) 300" 640x400 956 - 1542 150" 300x230 501 - 810 200" 410x300 670 - 1081 250" 510x380 839 - 1353 Projection Distance (EB-1915/1910/1900/1830) 300"...

  • Page 113: Connecting And Removing Usb Devices (Eb-1925W/1920W/1915/1910/1830 Only)

    USB memories and USB compatible digital cameras, hard disk drives, and the optional Document Camera can be connected to the projector. On EB-1925W/1915, you can use PC Free to project scenarios, images and movie files on the connected USB storage device, and image files in your digital camera.

  • Page 114: Removing Usb Devices

    Connecting and Removing USB Devices (EB-1925W/1920W/1915/1910/1830 Only) Removing USB Devices Procedure After finishing projecting, remove USB devices from the projector. For digital cameras, hard disks, and so on, turn off the power to the device and then remove. Connecting the Document Camera (ELPDC06) When the optional Document Camera (ELPDC06)is connected, images from the Document Camera will be projected.

  • Page 115: Connecting With A Usb Cable And Projecting (Usb Display)

    Connecting with a USB Cable and Projecting (USB Display) By using a USB cable to connect the projector to a Windows computer Connecting you can project images from the computer. This function is called USB Display. Simply by connecting via a USB cable, images from the computer can be displayed.

  • Page 116: Connecting For The First Time

    "From the second time" p.117 • On EB-1925W/1915, you can output the computer's audio to the projector's speaker by simply connecting the USB cable. If you do not want the audio be output from the projector, click Start - EPSON Projector - EPSON USB Display - EPSON USB Display Vx.xx on the computer, then uncheck Output audio from the...

  • Page 117: From The Second Time

    Connecting with a USB Cable and Projecting (USB Display) Computer images are projected. From the second time It may take a while before computer images are projected. Until computer images are projected, leave the equipment as it is and Computer images are projected. do not disconnect the USB cable or turn off the power to the It may take a while before computer images are projected.

  • Page 118: Connecting Lan Cable

    Connecting LAN Cable (EB-1925W/1920W/1915/1910/1830 Only) Connect with a commercially available 100BASE-TX or 10BASE-T LAN cable. To LAN port LAN cable (commercially available) To LAN port Attention To prevent malfunctions, use a category 5 shielded LAN cable.

  • Page 119: Connecting To External Equipment

    Connecting to External Equipment • Component video signals and signals from equipment connected Connecting to an External Monitor (EB-1925W/ to ports other than Computer1 input port cannot be output to 1920W/1915/1910/1830 Only) an external monitor. • If you want to display images on the external monitor while the...

  • Page 120: Connecting To An External Speaker (Eb-1925W/1920W/1915/1910/1830 Only)

    Connecting to External Equipment • When the audio cable jack is inserted into the Audio Out Port, Connecting to an External Speaker (EB-1925W/ audio stops being output from the projector's built-in speakers 1920W/1915/1910/1830 Only) and switches to external output. • When using a commercially available 2RCA(L/R)/stereo mini-pin You can connect speakers with built-in amplifiers to the projector's audio cable, make sure it is labeled "No resistance".

  • Page 121: Reading Problem Mail Notification Function (Eb-1925W/1920W/1915/1910/1830 Only)

    Reading Problem Mail Notification Function (EB-1925W/1920W/1915/1910/1830 Only) When the Mail Notification function is set to On and a problem/ warning occurs in the projector, the following e-mail will be sent. Subject: EPSON Projector Line 1: The Projector Name where the problem has occurred Line 2: The IP Address set for the projector where the problem has occurred.

  • Page 122: Esc/Vp21 Commands

    Computer2 Auto SOURCE 2F (EB-1925W/1920W/ SOURCE 21 1915/1910/1830 on- Component SOURCE 24 HDMI (EB-1925W/1915only) SOURCE 30 Video SOURCE 41 S-Video SOURCE 42 USB Display SOURCE 51 USB1 (EB-1925W/1915 only) USB SOURCE 52 (EB-1920W/1910/1830 only) LAN (EB-1925W/1920W/ SOURCE 53 1915/1910/1830 only)

  • Page 123: Communications Protocol

    ESC/VP21 Commands • Projector input port name: RS-232C <At the projector> <At the computer> <At the projector> (PC serial cable) <At the computer> Signal Name Function Signal wire ground Transmit data Receive data Communications protocol • Default baud rate setting: 9600 bps •...

  • Page 124: About Network Projector (Eb-1925W/1915 Only)

    About Network Projector (EB-1925W/1915 Only) There are two methods connecting the projector to a computer via a This section provides an easy explanation of Network Projector. network and project images from the computer screen. Check that the projector and computer are connected to the network, •...

  • Page 125: About Pjlink (Eb-1925W/1920W/1915/1910/1830 Only)

    About PJLink (EB-1925W/1920W/1915/1910/1830 Only) • Manufacturer name displayed for "Manufacture name information query" PJLink Class1 was established by the JBMIA (Japan Business Machine and Information System Industries Association) as a standard protocol EPSON for controlling network-compatible projector's as part of their efforts to standardize projector control protocols.

  • Page 126: Supported Monitor Displays

    Supported Monitor Displays Supported Monitor Displays (EB-1925W/1920W) Computer signals (analog RGB) Units: dots Aspect Mode Refresh Rate Signal Resolution (Hz) Normal 16:9 Full Zoom Native VGAEGA 640x350 1280x700 1280x720 1280x800 1280x700 640x350 60/72/75/85/iMac 640x480/640x360 1066x800 1280x720 1280x800 1280x800 640x480 SVGA...

  • Page 127: Component Video

    Supported Monitor Displays Aspect Mode Refresh Rate Signal Resolution (Hz) Normal 16:9 Full Zoom Native MAC21" 1152x870 1059x800 1280x720 1280x800 1280x800 1152x800 *1 Connection is disabled if the equipment does not have a VGA output port. *2 Letterbox signal *3 Only compatible when Wide is selected as the Resolution from the Configuration Menu. Even when signals other than those mentioned above are input, it is likely that the image can be projected.

  • Page 128: Input Signal From The Hdmi Input Port (Eb-1925W Only)

    Supported Monitor Displays Input signal from the HDMI input port (EB-1925W only) Units: dots Aspect Mode Refresh Rate Signal Resolution (Hz) 16:9 Full Zoom Native 640x480/640x360 1280x720 1280x800 1280x800 640x480 SVGA 800x600 1280x720 1280x800 1280x800 800x600 1024x768 1280x720 1280x800 1280x800...

  • Page 129: Supported Monitor Displays (Eb-1915/1910/1900/1830)

    Supported Monitor Displays Supported Monitor Displays (EB-1915/1910/1900/1830) Computer signals (analog RGB) Units: dots Aspect Mode Refresh Rate Signal Resolution (Hz) Normal 16:9 VGAEGA 640x350 1024x560 1024x768 1024x576 60/72/75/85/iMac 640x480/640x360 1024x768 1024x768 1024x576 SVGA 56/60/72/75/85/iMac 800x600/800x450 1024x768 1024x768 1024x576 60/70/75/85/iMac 1024x768/1024x576 1024x768 1024x768 1024x576...

  • Page 130: Component Video

    Supported Monitor Displays Component video Units: dots Aspect Mode Refresh Rate Signal Resolution (Hz) 16:9 SDTV(480i) 720x480/720x360 1024x768 1024x576 SDTV(576i) 720x576/720x432 1024x768 1024x576 SDTV(480p) 720x480/720x360 1024x768 1024x576 SDTV(576p) 720x576/720x432 1024x768 1024x576 HDTV(720p) 50/60 1280x720 1024x768 1024x576 HDTV(1080i) 50/60 1920x1080 1024x768 1024x576 HDTV(1080p) 50/60...
  • Page 131 Supported Monitor Displays Aspect Mode Refresh Rate Signal Resolution (Hz) 16:9 Zoom WXGA 1280x800 1024x768 1024x576 1280x960 1024x768 1024x576 SXGA 1280x1024 1024x768 1024x576 SXGA+ 1400x1050 1024x768 1024x576 UXGA 1600x1200 1024x768 1024x576 SDTV(480i) 720x480/720x360* 1024x768 1024x576 SDTV(480p) 720x480/720x360* 1024x768 1024x576 SDTV(576i) 720x576/720x432* 1024x768 1024x576...

  • Page 132: Specifications

    Specifications Projector General Specifications EB-1915 EB-1925W EB-1910 EB-1920W EB-1830 EB-1900 Product name Dimensions 357 (W) x 86 (H) x 257 (D) mm (not including raised section) 0.7" 0.74" Wide 0.7" 0.74" Wide 0.7" Panel size Display method Polysilicon TFT active matrix...
  • Page 133 Specifications EB-1915 EB-1925W EB-1910 EB-1920W EB-1830 EB-1900 Product name Altitude 0 to 2,286 m Operating altitude 5 to +35˚C (No condensation) Operating temperature -10 to +60˚C (No condensation) Storage temperature Approx. 3.5kg Approx. 3.4kg Approx. 3.2kg Mass Mini Connec- Computer Input Port...
  • Page 134 Specifications EB-1915 EB-1925W EB-1910 EB-1920W EB-1830 EB-1900 Product name USB connector (Type A) Connec- USB1 port tors USB connector (Type A) USB2 port USB connector (Type A) USB (TypeA) Port USB connector (Type B) USB (TypeB) Port USB Port USB connector (Type A)

  • Page 135: Software Requirements (Eb-1925W/1920W/1915/1910/1830 Only)

    Specifications Software Requirements (EB-1925W/1920W/1915/1910/1830 Only) The software supplied with the projector runs on computers that meet the following requirements. EasyMP Slide Converter is only included in EB-1925W/1915. EasyMP Network Projection EasyMP Slide Converter EasyMP Monitor Windows 2000 SP4/Windows XP/Windows XP...
  • Page 136 Specifications FCC Compliance Statement DECLARATION of CONFORMITY For United States Users According to 47CFR, Part 2 and 15 Class B Personal Computers and Peripherals; and/or This equipment has been tested and found to comply with the limits CPU Boards and Power Supplies used with Class B Personal Computers for a Class B digital device, pursuant to Part 15 of the FCC Rules.

  • Page 137: Appearance

    Appearance Center of lens * Distance from center of lens to suspension bracket fixing point Units: mm...

  • Page 138: Glossary

    Glossary This section explains easily terms that are used with the projector and difficult terms that are not explained in the text of this guide. For details, refer to other commercially available publications. AMX Device Discovery is a technology developed by AMX to facilitate AMX control systems for easy operation of the target equipment. AMX Device Discovery Epson have implemented this protocol technology, and have provided a setting to enable the protocol function (ON).
  • Page 139 Glossary The light-emitting element of a display maintains the same luminosity and color for an extremely short time. Because of this, the image must be Refresh Rate scanned many times per second to refresh the light-emitting element. The number of refresh operations per second is called the Refresh Rate and is expressed in hertz (Hz).

  • Page 140: General Notes

    General Notes All rights reserved. No part of this publication may be reproduced, stored in a General Notice: retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Windows Vista and the Windows logo are trademarks of the Microsoft group of Epson Corporation.
  • Page 141 General Notes As well as the free software used under the terms of the LGPL, this Software Copyright: company also uses the following free software for this product. This product uses free software as well as software to which this compa- Hereafter, each author, the conditions, and so on are described in the ny holds the rights.
  • Page 142 General Notes busybox-1.7.2 For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that libgcc1(gcc-4.2.3) they, too, receive or can get the source code. And you must show them these terms linux-2.6.20 so they know their rights.
  • Page 143 General Notes You may copy and distribute verbatim copies of the Program's source code as In addition, mere aggregation of another work not based on the Program with you receive it, in any medium, provided that you conspicuously and appropriate- the Program (or with a work based on the Program) on a volume of a storage or ly publish on each copy an appropriate copyright notice and disclaimer of war- distribution medium does not bring the other work under the scope of this Li-...
  • Page 144 General Notes You may not copy, modify, sublicense, or distribute the Program except as ex- It is not the purpose of this section to induce you to infringe any patents or oth- pressly provided under this License. Any attempt otherwise to copy, modify, sub- er property right claims or to contest validity of any such claims;...
  • Page 145 General Notes This program is free software; you can redistribute it and/or modify it under the NO WARRANTY terms of the GNU General Public License as published by the Free Software 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS Foundation;...
  • Page 146 General Notes This license, the Lesser General Public License, applies to some specially designated GNU LGPL software packages--typically libraries--of the Free Software Foundation and other This projector product includes the open source software programs which ap- authors who decide to use it. You can use it too, but we suggest you first think ply the GNU Lesser General Public License Version 2 or later version ("LGPL Pro- carefully about whether this license or the ordinary General Public License is the grams").
  • Page 147 General Notes Most GNU software, including some libraries, is covered by the ordinary GNU GNU LESSER GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPY- General Public License. This license, the GNU Lesser General Public License, applies ING, DISTRIBUTION AND MODIFICATION to certain designated libraries, and is quite different from the ordinary General This License Agreement applies to any software library or other program which Public License.
  • Page 148 General Notes You must cause the files modified to carry prominent notices stating that Once this change is made in a given copy, it is irreversible for that copy, so the you changed the files and the date of any change. ordinary GNU General Public License applies to all subsequent copies and deriv- ative works made from that copy.
  • Page 149 General Notes As an exception to the Sections above, you may also combine or link a "work For an executable, the required form of the "work that uses the Library" must in- that uses the Library" with the Library to produce a work containing portions of clude any data and utility programs needed for reproducing the executable the Library, and distribute that work under terms of your choice, provided that from it.
  • Page 150 General Notes 10. Each time you redistribute the Library (or any work based on the Library), the re- 13. The Free Software Foundation may publish revised and/or new versions of the cipient automatically receives a license from the original licensor to copy, distrib- Lesser General Public License from time to time.
  • Page 151 General Notes 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED You should also get your employer (if you work as a programmer) or your school, if TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PAR- any, to sign a "copyright disclaimer"...
  • Page 152 General Notes THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS "AS You may not pretend that you wrote this software. If you use it in a program, IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT you must acknowledge somewhere in your documentation that you've used the LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FIT- IJG code.
  • Page 153 General Notes The Unix configuration script "configure" was produced with GNU Autoconf. It is COPYRIGHT NOTICE, DISCLAIMER, and LICENSE: copyright by the Free Software Foundation but is freely distributable. The same holds If you modify libpng you may insert additional notices immediately following this sen- for its supporting scripts (config.guess, config.sub, ltconfig, ltmain.sh).
  • Page 154 General Notes John Bowler Also, the PNG logo (in PNG format, of course) is supplied in the files "pngbar.png" and "pngbar.jpg (88x31) and "pngnow.png" (98x31). Kevin BraceySam Bushell Libpng is OSI Certified Open Source Software. OSI Certified Open Source is a certifi- Sam Bushell cation mark of the Open Source Initiative.
  • Page 155 General Notes If you use the zlib library in a product, we would appreciate *not* receiving lengthy le- http://www.ietf.org/rfc/rfc1321.txt gal documents to sign. The sources are provided for free but without warranty of any The code is derived from the text of the RFC, including the test suite (section A.5) kind.
  • Page 156 General Notes THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY For MPEG-4 AVC: KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WAR- THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LI- RANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE CENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUM- AND NONINFRINGEMENT.

  • Page 157: Index

    Index Color Mode ..........31, 53 Extended Menu ..........58 Color Saturation .......... 53 E-Zoom ............39 A/V Mute ............32 Computer1 Input Port ....12, 13, 15 Abs. Color Temp......... 53 Computer2 Input Port ....12, 13, 15 Address 1 Setting .........
  • Page 158 Index Keystone ............56 Operating temperature ......133 Quick Corner ......... 26, 56 Operation ............59 Optional accessories ........104 Others menu .......... 70, 77 Lamp cover ........... 11 Reading Problem Mail Notification ..121 Overheating ..........84 Lamp Hours ..........79 Rear ............
  • Page 159 Index Source Search ......16, 17, 18, 29 Specifications ..........132 Video Input Port ......11, 13, 14 Sports ............. 31 Video Signal ........... 55, 79 sRGB ............12, 31 Volume ............57 SSID ............... 63 Standby Mode ..........59 Startup Screen ..........

This manual is also suitable for:

Eb-1920wEb-1915Eb-1830Eb-1910Eb-1900

Table of Contents