Turning On The Projector - Epson EB-1985WU User Manual

Turning On the Projector

Turn on the computer or video equipment you want to use after you turn
on the projector.
a
Connect the power cord to the projector's power inlet.
b
Plug the power cord into an electrical outlet.
The projector's power light turns blue. This indicates that the
projector is receiving power, but is not yet turned on (it is in
standby mode).
c
Press the power button on the control panel or remote control to
turn on the projector.
The projector beeps and the status light flashes blue as the projector
warms up. Once the projector is warmed up, the status light stops
flashing and turns blue.
Warning
Never look into the projector lens when the lamp is on. This can
damage your eyes and is especially dangerous for children.
d
Open the projector's lens cover.
Try the following if you do not see a projected image.
• Verify the lens cover is open all the way.
• Turn on the connected computer or video device.
• Change the screen output from the computer when using a laptop
computer.
• Insert a DVD or other video media, and press play (if necessary).
• Press the [Source Search] button on the remote control or control panel
to detect the source.
• Press the button for the desired video source on the remote control.
35