Installing The Beltclip - Uniden XDECT 8055 Owner's Manual

7) Place the handset in the charger with the
display facing forward. The CHARGE light
on the handset should turn on.
If...
the CHARGE
light does
not turn on
Charge the handset completely
(about 15 hours) before using it.

Installing the Beltclip

Line up the holes on each side of the handset.
To attach the belt clip; Insert into the holes on each side of the
handset. Press down until it clicks.
To remove the belt clip; Pull either side of the belt clip to release
the tabs from the holes.
Headset Installation
Your handset may be used with the Uniden HS915 headset.
To use this feature, insert the headset plug into the headset jack.
Your handset is ready for hands-free conversations. Headsets can
be purchased online, see the website details on the front cover.
Try...
- reseating the handset.
- checking the AC adaptor connection.
- seeing if the outlet is controlled by a
wall switch.
5