Table of Contents
Advertisement
Setting Up Your Answering System
You can set up your answering system from any handset or from the
base.
To...
Record your
personal
outgoing
message or
greeting
Switch
between the
pre-recorded
greeting &
your own
greeting
Delete your
greeting
Ans. Setup menu options
You can change the answering system options from any handset or
from the base. Just open the menu and select Ans. Setup.
Menu Option
Security Code
Ring Time
Using The Answering System
Follow these steps
1.
Open the menu with the phone in standby. Select Ans.
Setup, then Record Greeting.
MENU/SELECT to start recording. Wait until the
2.
Press
system says "Record greeting" before speaking.
MENU/SELECT to stop recording. The system plays
3.
Press
back your new greeting.
4.
To keep the greeting, press
STOp on the base. To delete it and try again, press
INTErCOM/CLEAr on the handset or DELETE on the
base
1.
Open the menu with the phone in standby. Select Ans.
Setup, then Greeting Options.
2.
The system plays back the current greeting. Press
MENU/SELECT to switch greetings.
1.
Switch to your personal greeting following the steps above.
2.
While the system is playing back your greeting, press
INTErCOM/CLEAr on the handset or DELETE on the
base.
What it does
Enter a 2-digit PIN so you can access your answering
system from any touch-tone phone (see page 41).
Set the number of rings (6, 9 or 12) before the answering
system answers the phone. Choose Toll Saver (TS) to
have the system pick up after 2 rings if you have new
messages or after 4 rings if you don't.
END on the handset or pLAy/
37
Hide quick links:
Advertisement
Table of Contents
