Using Multi-Station Features; Expanding Your Phone; Using Conference Calling - Uniden XDECT 8055 Owner's Manual

Xdect 8055 series

Hide thumbs

Table Of Contents

Table of Contents

The expandable base and the cordless handset give you some useful

multi-station features. (A station can be any handset or the base.)

Expanding Your Phone

Your base supports a maximum of 12 cordless handsets: the one

that came with the base and up to 11 XDECT 8005 accessory

handsets.

Note: Expansion capacity is limited to six (6) handsets total if an

XDECT 8015WP or XDECT 8005WP (waterproof) handset is

registered. Your base also supports a total of 2 repeaters, including

any that came with your phone. Visit the XDECT 8055 page on the

website for compatible repeaters.

Your base might be compatible with other Uniden accessory

handsets: please visit our website for a list of compatible handsets.

Accessory handsets/repeaters must be registered to the base

before you can use them. Handsets that aren't registered display

a Handset not registered message. For instructions on registering

handsets/repeaters to this base, see pages 46 & 47 or the manual

for the accessory.

Any accessory handset(s)/repeater that came packaged with the

base are already registered to that base for you.

If a handset was previously registered to a base, you have to reset

it so you can register it to a new base (see page 46 for XDECT

8005).

Using Conference Calling

When an outside call comes in, the base and two handsets can join in

a conference call with the outside caller. To join the call, just press

SpEAkEr on the base or

TALK /FLASH on a handset.

To leave the conference

call, hang up normally; the

other station remains

connected to the call. (You

can also use the handset

speakerphone for a

conference call, just like

you can with a normal call.)