Battery Maintenance; Installing The Beltclip; Headset Installation - Uniden XS 916 Quick Start Manual

BATTERY MAINTENANCE

Battery use time (per charge)
Use only the
• 9 hours continuous use
genuine Uniden
When the Battery charge becomes low
Super Chat
Battery supplied
If the phone is not in use, the '
with your phone.
flashes and the handset beeps. Complete your conversation as quickly as possible and return the handset to the base
Battery'
Replacement
unit for charging.
Super Chat
• You cannot overcharge the battery.
Batteries are
• You may return the handset to the charger after each call or when the battery is low.
available
Cleaning the charging contacts
through the
Uniden Parts
To maintain a good charge, it is important to clean the charging contacts on the handset base unit and additional charge cradle
Department.
with a dry cloth or a pencil eraser about once a month. Do not use any liquids or solvents.

INSTALLING THE BELTCLIP

To attach the beltclip:
Insert the beltclip into the holes on each side of the handset. Press down until it clicks.
If you are using
To remove the beltclip:
an optional
Pull both sides of the beltclip to release the tabs from the holes.
headset, you
must still use the
handset keypad

HEADSET INSTALLATION

for phone
operations.
Your phone may be used with an optional headset. To use this feature,
simply plug the headset into the headset jack.
• 12 days when handset is in the standby mode.
' flashes and none of the keys will operate. If the phone is in use, the '
Low Battery
Page 5
Low
Headset Jack