Command Line Interface - 3Com 7700 Configuration Manual

Command Line
Interface
Perform the following configuration in user interface view.
Table 16 Configure Automatic Command Execution
Operation
Configure to automatically run the
command
Configure not to automatically run
the command
Note the following points:
After executing the auto-execute command, the user interface can no longer
■
be used to carry out the routine configurations for the local system. Use this
command with caution.
Make sure that you will be able to log in to the system in some other way and
■
cancel the configuration, before you use the auto-execute command and
save the configuration.
Telnet 10.110.100.1 after the user logs in through VTY0 automatically.:
[SW7700-ui-vty0] auto-execute command telnet 10.110.100.1
When a user logs on via VTY 0, the system will run telnet 10.110.100.1
automatically.
Display and Debug User Interface
After creating the previous configuration, execute the display command in all
views to display the user interface configuration, and to verify the effect of the
configuration. Execute the free command in user view to clear a specified user
interface. See Table 17.
Table 17 Display and Debug User Interface
Operation
Clear a specified user interface free user-interface [ type ] number
Display the user application
information of the user
interface
Display the physical attributes
and some configurations of
the user interface
The Switch 7700 provides a series of configuration commands and command line
interfaces for configuring and managing the Switch 7700. The command line
interface has the following features.
Local configuration through the console port.
■
Local or remote configuration through Telnet.
■
Remote configuration through a dial-up Modem to log in to the Switch 7700.
■
Hierarchy command protection to prevent unauthorized users from accessing
■
the switch.
Access to online Help by entering
■
Command
auto-execute command text
undo auto-execute command
Command
display users [ all ]
display user-interface [ type number ] [ number ]
.
?

Command Line Interface

19