3Com 7700 Configuration Manual page 23

Configure idle-timeout By default, idle-timeout is enabled and set to 10
minutes on all the user interfaces. The idle-timeout command is described in
Table 5.
Table 5 Idle Timeout
Operation
Configure idle-timeout
Restore the default idle-timeout
Lock user interface This command locks the current user interface and
prompts the user to enter a password. This makes it impossible for others to
operate in the interface after the user leaves. The lock command is described in
Table 6.
Table 6 Lock User Interface
Operation
Lock user interface
Set the screen length If a command displays more than one screen of
information, you can use the screen length command to determine how many
lines are displayed on a screen so that information can be separated in different
screens and you can view it more conveniently. The screen-length command is
described in Table 7.
Table 7 Setting Screen Length
Operation
Set the screen length
Restore the default screen
length
By default, the terminal screen length is 24 lines.
Set the History Command Buffer SIze Table 8 describes the
history-command max-size command. By default, the size of the history
command buffer is 10.
Table 8 Set the History Command Buffer Size
Operation
Set the history command
buffer size
Restore the default history
command buffer size
Manage Users
The management of users includes the setting of the user logon authentication
method, the level of command a user can use after logging on, the level of
command a user can use after logging on from the specifically user interface, and
command level.
Setting Terminal Parameters
Command
idle-timeout minutes [ seconds ] (idle-timeout 0 means
disabling idle-timeout.)
undo idle-timeout
Command
lock
Command
screen-length screen-length (screen-length 0 indicates to
disable screen display separation function.)
undo screen-length
Command
history-command max-size value
undo history-command max-size
15