3Com 7700 Configuration Manual page 110

102 C 5: R P
HAPTER OUTING
O
ROTOCOL PERATION
Table 51 Define If-match Conditions
Operation
Match the tag domain of the
OSPF routing information
Cancel the tag domain of the
matched OSPF routing
information
By default, no matching is performed.
Note that:
The if-match clauses for a node in the route policy require that the route
■
satisfy all the clauses to match the node before the actions specified by the
apply clauses can be executed.
If no if-match clauses are specified, all the routes pass the filtering on the
■
node.
Define Apply Clauses for a Route Policy
The apply clauses specify actions, which are the configuration commands
executed after a route satisfies the filtering conditions that are specified in the
if-match clauses. In this way, some attributes of the route can be modified.
Perform the following configurations in Route policy view.
Table 52 Define Apply Clauses
Operation
Modify an AS path for BGP routes. apply as-path as-number-1 [ as-number-2 [
Cancel modification of an AS path
for BGP routes.
Set the community attribute in the
BGP routing information
Cancel the set community attribute
in the BGP routing information
Set the next-hop address of the
routing information
Cancel the next-hop address of the
routing information
Set the local preference of the BGP
routing information
Cancel the local preference of the
BGP routing information
Set the routing cost of the routing
information
Cancel the routing cost of the
routing information
set the cost type of the routing
information
remove the setting of the cost type undo apply cost-type
Set the route origin of the BGP
routing information
Command
if-match tag value
undo if-match tag
Command
as-number-3 ... ] ]
undo apply as-path
apply community { [ { aa:nn | no-export-subconfed |
no-advertise | no-export ]... } | [ additive | none ]
undo apply community
apply ip next-hop { ip-address [ ip-address ] | acl
acl-number }
undo apply ip next-hop [ ip-address [ ip-address ] | acl
acl-number ]
apply local-preference localpref
undo apply local-preference
apply cost value
undo apply cost
apply cost-type [ internal | external ]
apply origin { igp | egp as-number | incomplete }