Table of Contents
Advertisement
Verifying a Recording Schedule
________________________________________________________________________________________________________
Document 800-05305 Rev A
11/09
1.
Select a single day of the week using the selection check box to the left of the
specified day.
Identify the schedule (or schedules) that have specific hours of the day highlighted
2.
in light blue color. The horizontal axis of the schedule grid corresponds to the 24
hours of each day.
After verifying that all hours of the selected day are covered by at least one of the
3.
32 independent schedules (vertical axis of schedule grid) now look to the lower
half of the schedule interface.
4.
In the "Schedule Number:" selection drop down box, select the schedule(s) that
were defined above for the current day and verify, in each schedule number, that
the correct cameras are set to Continuous, Motion or Sensor based recording.
If a specific camera should not be recorded on a given day/schedule
Note
combination, set the camera to "Not Selected" - a white "X".
Repeat this process for each of the 7 days of the week until certain that the
5.
desired recording method is configured for each day.
71
Advertisement
Table of Contents
