Ipv6 Over Pppoe (Stateless) - D-Link DIR-615 User Manual

Section 3 - Configuration
My IPv6 Connection:
Select PPPoE from the drop-down menu.
PPPoE:
Enter the PPPoE account settngs suppled by your Internet provder (ISP).
Address Mode:
Select Static f your ISP assgned you the IP address, subnet mask, gateway,
and DNS server addresses. In most cases, select Dynamic.
IP Address:
Enter the IP address (Statc PPPoE only).
User Name:
Enter your PPPoE user name.
Password:
Enter your PPPoE password and then retype the password n the next box.
Service Name:
Enter the ISP Servce Name (optonal).
Reconnection Mode:
Select ether Always-on, On-Demand, or Manual.
Maximum Idle Time:
Enter a maxmum dle tme durng whch the Internet connecton s mantaned
durng nactvty. To dsable ths feature, enable Auto-reconnect.
MTU:
Maxmum Transmsson Unt - you may need to change the MTU for optmal
performance wth your specfic ISP. 1500 s the default MTU.
IPv6 DNS Settings:
Select ether Obtain. DNS. server. address. automatically or Use. the.
following.DNS.Address.
Primary/Secondary DNS
Enter the prmary and secondary DNS server addresses.
Address:
LAN IPv6 Address:
Enter the LAN (local) IPv6 address for the router.
LAN Link-Local Address:
Dsplays the Router's LAN Lnk-Local Address.
D-Lnk DIR-615 User Manual

IPv6 over PPPoE (Stateless)

52