Section 3 - Configuration
The Inbound Flter opton s an advanced method of controllng data receved from the Internet. Wth ths feature you can configure nbound
data filterng rules that control data based on an IP address range. Inbound Flters can be used wth Vrtual Server, Port Forwardng, or Remote
Admnstraton features.
Name:
Enter a name for the nbound filter rule.
Action:
Select Allow or Deny.
Enable:
Check to enable rule.
Source IP Start:
Enter the startng IP address. Enter 0.0.0.0 f you do not want
to specfy an IP range.
Source IP End:
Enter the endng IP address. Enter 255.255.255.255 f you do
not want to specfy and IP range.
Save:
Clck the Save button to apply your settngs. You must clck
Save Settngs at the top to save the settngs.
Inbound Filter Rules
Ths secton wll lst any rules that are created. You may clck
List:
the Edit con to change the settngs or enable/dsable the
rule, or clck the Delete con to remove the rule.
D-Lnk DIR-615 User Manual
Inbound Filters
40