Section 3 - Configuration
After selecting the IPv6 over PPPoE option, the user will be able to
configure the IPv6 Internet connection that requires a username and
password to get online. Most DSL modems use this type of connection.
The following parameters will be available for configuration:
PPPoE Session:
Select the PPPoE Session value used here. This option
will state that this connection shares it's information
with the already configured IPv6 PPPoE connection,
or the user can create a new PPPoE connection here.
Username:
Enter the PPPoE username used here. If you do not
know your user name, please contact your ISP.
Password:
Enter the PPPoE password used here. If you do not
know your password, please contact your ISP.
Verify Password:
Re-enter the PPPoE password used here.
Service Name:
Enter the service name for this connection here. This
option is optional.
Click on the Next button to continue. Click on the
Prev button to return to the previous page.
Click on the Cancel button to discard all the changes
made and return to the main page.
D-Link DHP-1565 User Manual
IPv6
IPv6 over PPPoE
47