Ipv6 Over Pppoe (Stateless) - D-Link DIR-615 User Manual

Secton  - Configuraton
My IPv6 Connection:
Select PPPoE from the drop-down menu.
PPPoE:
Enter the PPPoE account settings supplied by your Internet
provider (ISP).
Address Mode:
Select Static if your ISP assigned you the IP address, subnet
mask, gateway, and DNS server addresses. In most cases,
select Dynamic.
IP Address:
Enter the IP address (Static PPPoE only).
User Name:
Enter your PPPoE user name.
Password:
Enter your PPPoE password and then retype the password
in the next box.
Service Name:
Enter the ISP Service Name (optional).
Reconnection Mode:
Select either Always-on, On-Demand, or Manual.
Maximum Idle Time:
Enter a maximum idle time during which the Internet
connection is maintained during inactivity. To disable this
feature, enable Auto-reconnect.
IPv6 DNS Settings:
Select either Obtain.DNS.server.address.automatically
or Use.the.following.DNS.Address.
Primary/Secondary DNS
Enter the primary and secondary DNS server addresses.
Address:
LAN IPv6 Address:
Enter the LAN (local) IPv6 address for the router.
LAN Link-Local Address:
Displays the Router's LAN Link-Local Address.
D-Lnk DIR-615 User Manual

IPv6 over PPPoE (Stateless)

55