Manual Wireless Network Setup - D-Link DIR-615 User Manual

Section 3 - Configuration
Enable Wireless:
Check the box to enable the wreless functon. If you do not
want to use wreless, uncheck the box to dsable all the wreless
functons. Clck Add.New to create your own tme schedule to
enable the wreless functon.
Wireless Network
Servce Set Identfier (SSID) s the name of your wreless network.
Name:
Create a name usng up to 32 characters. The SSID s case-
senstve.
802.11 Mode:
Select one of the followng:
802.11g. Only - Select f all of your wreless clents are
802.11g.
802.11n.Only - Select only f all of your wreless clents are
802.11n.
Mixed.802.11n.and.802.11g - Select f you are usng a mx
of 802.11n and 802.11g wreless clents.
Enable Auto Channel The Auto. Channel. Scan settng can be selected to allow
Scan: the DIR-615 to choose the channel wth the least amount of
nterference.
Wireless Channel: Indcates the channel settng for the DIR-615. By default the
channel s set to 6. The Channel can be changed to fit the channel
settng for an exstng wreless network or to customze the
wreless network. If you enable Auto.Channel.Scan, ths opton
wll be greyed out.
Transmission Rate: Select the transmt rate. It s strongly suggested to select Best.
(Auto) for best performance.
Channel Width: Select the Channel Wdth:
Auto.20/40 - Select f you are usng both 802.11n and non-802.11n wreless devces.
20MHz - Select f you are not usng any 802.11n wreless clents. Ths s the default settng.
Visibility Status: Select Invisible f you do not want the SSID of your wreless network to be broadcasted by the DIR-615. If Invsble s selected, the SSID of the DIR-615 wll not
be seen by Ste Survey utltes so your wreless clents wll have to know the SSID of your DIR-615 n order to connect to t.
Wireless Security: Refer to page 79 for more nformaton regardng wreless securty.
D-Lnk DIR-615 User Manual

Manual Wireless Network Setup

26