Installing The Handlebar - Yamaha XF50W Service Manual

HANDLEBAR
EAS00673

INSTALLING THE HANDLEBAR

1. Stand the scooter on a level surface.
w
Securely support the scooter so that there
is no danger of it falling over.
2. Install:
8 handlebar©
8 handlebar upper holders
X I 28Nm(2.8m
C
First, tighten the bolts on the front side of
the handlebar holders, and then on the rear
side.
NOTE:
8 The upper handlebar holders should be in-
stalled with the arrow marks a facing for-
ward A
8 Align the match marks b on the handlebar
with the upper surface of the handlebar
lower holder.
3. Install:
8 handlebar grip
NOTE:
Before installing the handlebar grip, apply the
bond.
4. Install:
8 left handlebar switch 1
NOTE:
Align the projection a on the left handlebar
switch with the hole b on the handlebar.
4-30
(2)
* kg, 20.3ft * lb)