Yamaha XF50W Service Manual page 295

EAS00750
9. Engine stop switch
• Check the engine stop switch for continuity.
Refer to "CHECKING THE SWITCHES".
• Is the engine stop switch OK?
YES
V
EAS00752
10. Sidestand switch(optional)
• Check the sidestand switch for continuity.
Refer to "CHECKING THE SWITCHES".
• Is the sidestand switch OK?
YES
V
11. Lean angle cut-off switch
• Remove the lean angle cut-off switch.
• Connect the pocket
angle cut-off switch terminals as shown.
Positive tester probe
Negative tester probe
m
Lean angle cut-off switch voltage
Less than
More than 65°
4
NO
Replace the right
handlebar switch.
NO
Replace the sidestand
switch.
tester(£2 x1) to the lean
-> blue ©
-> yellow/green
/ \
x
< • / / / / ,
X
65°®-» 0.4~1.4V
© -»3.7~4.4V
IGNITION SYSTEM
YES
V
EAS00754
12. Wiring
• Check the entire ignition system's wiring.
Refer to "CIRCUIT DIAGRAM".
• Is the ignition system's wiring properly con-
nected and without defects?
YES
V
Replace the ECU.
8-13
ELEC
NO
*
Replace the lean angle
cut-off switch.
I
NO
Properly connect or re-
pair the ignition system's
wiring.
+i