Table of Contents
Advertisement
A Quick Reference Guide for the Avaya MultiVantage Telephone System
Telephone Features Summary: (continued)
• Speed Dial Buttons – Speed Dial (SD) buttons (shown below) are those which
you can program to dial numbers.
o The number that is programmed is stored in the telephone system
independent of the telephone instrument.
o This information is also available when using IP-Softphone (detailed later
herein).
o These buttons can be labeled with a name if you like using the (Label)
button found on the lower right side of the screen. Instructions for
labeling are provided later in this document.
o Programming Summary:
Revised 05/13/06– JTM
TELEPHONE TIPS
46xx Model IP-Telephones
Get Dial Tone and dial (#80) – the # sign must be dialed.
Depress the SD button to be programmed.
Dial (9 for calls outside the system) and the number to be called as
you would normally dial it. A maximum of 16-digits may be
entered.
Re-Depress the SD button being programmed.
Hang up. The button has been programmed.
Depress (PHONE/EXIT)
It may take a few moments for the display to refresh after
programming a button.
© 2006 JTM Associates, Inc. ®
Page 10 of 43
Advertisement
Table of Contents
