Table of Contents
Advertisement
Setting the OneRemote Volume Option
When the
t
key is pressed, the Samsung TV is powered up automatically
and turned on in the TV mode.
If a Bang & Olufsen audio master is in the room, it is possible to use it for
handling the sound. Below options determine how the One Remote RMB4
handles volume in the TV mode.
This option also allows for the powering up of other B&O devices than the TV,
when
is selected. The audio signal from the TV is wired to the audio
t
master using a Line to DataLink cable. Moving the TV sound to the speakers of
the audio master improves the sound quality significantly.
Volume Options
Enter one of these option sequences
within 10 seconds:
L
mq00w
L
mq01w
L
mq02w
L
mq03w
is pressed the Beo4 sends a Power On command to the TV. At the same time the Beo4 sends a B command to a Bang & Olufsen
t
*1 When
audio master. Until another source is selected, volume commands will be directed to the B&O audio master.
is pressed the Beo4 sends a Power On command to the TV. At the same the Beo4 sends a c command to a Bang & Olufsen
t
*2 When
system. Until another source is selected, volume commands will be directed to the B&O system. Via a BeoLink Active sound may be moved from the TV
to PowerLink speakers.
www.oneremote.dk
Sound Destination
Alternative speakers.
Volume disabled
The Samsung TV
B
*1
c
*2
Volume Control
Volume data format emitted
from Beo4.
No volume control
Samsung format
B
in B&O format
c
in B&O format
Page 8
Advertisement
Table of Contents
