Disabling the OneRemote Conversion
If the modified Beo4 remote control is to be used with Bang & Olufsen devices only, the converter can be
disabled. Simply enter the 7-key sequence shown in the table below.
Disable the OneRemote converter
Enable the OneRemote converter.
When the OneRemote converter is disabled, the Beo4 remote control will operate as if no converter had been installed.
Temporarily Bang & Olufsen TV control
t Controls a Bang & Olufsen TV
t Controls a Sony TV factory.
www.oneremote.dk
Lmq0002
Lmq0012
Factory
Volume down followed by
Volume down followed by
0
1
5