Page 1
User Manual Converter installed in a Beo4 OneRemote RMB4 Converter for Beo4 Type 35104452 controls Sony TV all TV models 35104452.u3uk...
Page 2
Sony TV with that terminal. You may still operate Bang & Olufsen devices. The RMB4 factory setting will fit most users, making it possible to fully control a Sony TV as with its original Sony remote control.
PLAYBACK CONTROL TABLES ................... 5 APPLE TV CONTROL TABLES ..................5 CONTROL TABLES SONY TV – SPECIAL CONTROLS ..........6 Sony TV Special Controls ................6 Sony TV Special Controls - Navi ..............6 TEMPORARILY DISABLING THE ONEREMOTE TV CONVERSION ......6 www.oneremote.dk...
AppleTV receiver, may be programmed for another use. Program zap up/ down See the Apple TV page and the setup guide Guide Return Exit Menu Green function Red function Yellow function Blue function Use arrows for screen manoeuvring. www.oneremote.dk...
See the Apple TV page and the setup guide. TV-Guide Option Return – short press Return – long press = F Audio - Radio Menu Move the stick for on screen &/ manoeuvring. Green function Red function Yellow function Blue function www.oneremote.dk...
Rewind Apple TV Control Tables In the factory default setting the OneRemote converter can control an AppleTV after pressing a . First the Sony TV will open the TV’s HDMI2 source and hereafter the Beo4 remote control will shift to direct control of the Apple TV, according to the tables below.
Temporarily disabling the OneRemote TV Conversion A OneRemote modified Beo4 remote control controls non-Bang & Olufsen devices, in this case a Sony TV. But it is possible quickly to disable/ enable conversion, thus being able to control both a non-Bang &...