Program Stepping Up/ Down Manoeuvring In Menus; Setting The Zap Mode Option - OneRemote RMB4 User Manual

Program Stepping, Up/ Down Manoeuvring in Menus.
- when Beo4 is NOT in mode 1 or 3 (Navi)
Most set top boxes and TVs have 4 arrow keys for manoeuvring in on-screen menus, up, down, left and right. In addition
to these keys they are also equipped with separate program stepping keys for zapping through the programs. Often
these keys are named P+, P-, CH+ or CH-. This is also the case for a Samsung TV.
OneRemote converters often use the Rand the
and right keys are free for manoeuvring in on-screen menus.

Setting the Zap Mode Option

- when Beo4 is NOT in mode 1 or 3 (Navi)
If the OneRemote converter is installed in a Beo4 with aO key, the
D F
stepping. The and
This is the default factory setting, as described above.
If you prefer this control layout changed enter the options listed below.
Selecting the Zap Mode Keys:
Enter one of these 2 option sequences within 10 seconds to set the preferred Program Zap mode keys.
Lmq90
Lmq91
www.oneremote.dk
W
keys are used to manoeuvre up and down in on-screen menus.
w
w
keys for program zapping. This way the four up, down, left
R
keysW and
D F
The and keys are used for
program zapping.
The W R keys are used for
&
program zapping.
are used for program
Page 7