HDD: General
The HDD: General menu allows you to initialize the hard
drive(s) in the DVR. Don't initialize a drive that already
has data on it, as the initialization process will erase any
information on the drive.
HDD: Advanced/HDD Detect
The HDD: Advanced menu allows you to configure a quota
on the HDD for each camera that is connected to the DVR.
Each camera can be allocated a certain amount of space
that is available on the HDD.
Init:
Initializes the HDD so that it's ready to accept data.
The HDD: Detect menu will display technical specifications
of the hard drive installed. If you're looking at this screen,
you've probably been directed to do so by Swann Technical
Support.
33