Table of Contents
Advertisement
Playback: Smart Search (ctd)
1
2 3 4 5
1) Mute:
Mutes audio playback.
2) Start clipping:
This button allows you to set mark in and mark
out points on your video which you can then export to a USB flash
drive or USB hard drive. It's a basic way to edit a video file that you
have selected to play. When you have selected to play a video file,
press the Start clipping button at the mark in point and press
it again at the mark out point. To save the file, press the Exit
button. You will then be prompted if you would like to save the
file; click Yes to save. If you have made a mistake, click the Exit
button and click No. Repeat the above process. Multiple mark in
and mark out points can be applied.
3) Add default tag:
Tagging allows you to record information
such as location or people at a certain point within the video. The
default tag name is TAG. Multiple tags can be added.
Export: Normal/Event
The Export: Normal menu (above) will show you all
recordings that you can export to a USB Flash Drive.
From the Record Type menu, select the type(s) of video
you'd like to playback. The options are Normal, Motion,
Manual and All. Set your Start Date/Time and your End
Date/Time and click the Search button.
6
4) Add customized tag:
Same as above but you can choose your
own tag name.
5) Tag management:
This button allows you to edit or delete tags
that you have added to the video.
6) Play controls:
These are your play, pause, rewind and forward
controls.
7) Video Search/Hide/Exit:
video search, to hide the playback interface and to exit playback.
The Export: Event menu (below) will show you recordings
that were triggered by the DVR detecting motion.
Event Type:
Only Motion can be selected.
Set your Start Date/Time and your End Date/Time and
click the Search button.
These buttons allow you to go back to
7
31
Hide quick links:
Advertisement
Table of Contents
