Table of Contents
Advertisement
Configuration: Live View: View
In Live View, you can change the display order of each
camera connected -
1.
Select an available viewing window on the right-hand
side.
2.
Double click one of the available cameras on the left-
hand side that you would like to place in the viewing window
that you have selected.
Configuration: Live View: Channel-Zero Encoding
Enabling Channel-Zero Encoding will decrease the overall
network or Internet bandwidth required when viewing
remotely or with the SwannView Plus client software,
without sacrificing the image quality on the DVR. This
is suitable if you are trying to view multiple real-time
channels at the same time and you don't want to increase
the network traffic or Internet bandwidth that is required.
26
Play:
Pressing the Play button will start the live view of all
cameras connected to the DVR.
Pressing the Stop button will stop the live view of all
Stop:
cameras connected to the DVR.
Pressing the Stop button means that you will not see a
real-time view of all the cameras connected to the DVR at
the main viewing screen. Press the Play button to enable
real-time view.
Frame Rate:
The number of frames per second (fps) that
the DVR will display when viewed remotely.
Maximum Bitrate Mode:
This option is set to General and
cannot be changed.
Maximum Bitrate (Kbps):
will use when viewed remotely.
The amount of data that the DVR
Hide quick links:
Advertisement
Table of Contents
