Table of Contents
Advertisement
Configuration: General: DST Settings
Enable DST (check-box):
DVR to adjust the time when daylight savings time begins.
From/To:
Here you can define when daylight savings applies
to your location. There are many different standards for
DST which can vary dramatically even in the same time
zone, so you'll need to tell the DVR when it applies to you.
DST Bias:
This refers to the difference in minutes, between
Coordinated Universal Time (UTC) and the local time.
Select the time that DST has increased by in your time
zone.
Configuration: General: More Settings
Device Name:
The name that the DVR considers to be its
own and what it will use to register an IP address with your
DHCP host.
Device No.:
The internal device number of the DVR.
CVBS Output Brightness:
level of the Video Out connection. Note; this does not affect
the image setting of your recordings.
24
Enable this setting if you'd like the
Allows you to alter the brightness
Some NTP servers are not fully compatible with DST
(Daylight Savings Time). This may cause your system to
double-count adding one or removing one more hour than
they should, or cancel each other out. You may need to
intentionally change your time zone to compensate, or simply
not use NTP and DST simultaneously.
Operation Timeout:
Here you can change the time the DVR
will exit the menu screen and return to the camera viewing
screen if there is no activity.
Menu Output Mode:
Allows you to select which display the
main menu will be output to. You can select either VGA or
Main CVBS.
Hide quick links:
Advertisement
Table of Contents
