Search: Backup, Event & Log Search - Swann Pro-series User Manual

English
Search: Backup, Event & Log Search
To backup footage:
Connect a USB ash drive or a USB
HDD to the USB port on the front of
the DVR
- OR -
Connect an eSATA HDD to the eSATA
port on the rear of the DVR.
Choose the camera(s) you want to
backup footage from.
From the Video Type menu, select
the type(s) of video you want to
backup. The options are Manual,
Motion and Schedule.
Set your Start Time and End Time.
Select Backup.
The Event Search menu will show you
recordings that were triggered by the
DVR detecting motion.
Typically, the majority of recordings
based upon "Events" are likely to be
recordings triggered by the DVR's
motion detection feature.
The search function operates in the same
way as the main playback search: the
only di erence is you'll select an Event
Type rather than a Video Type.
The Log Search screen operates in the
same way as the other search screens,
but is able to access the entire DVR's
event log, not just recorded footage.
If you're looking for an event which has
no recorded footage associated with it
(such as a lost video signal, hard drive
error, Internet communication problem
or similar) this is where you'll nd it.
17