UPGRADING
The UCM6100 can be upgraded to a new firmware version remotely or locally. This section describes how
to upgrade your UCM6100 via network or local upload.
UPGRADING VIA NETWORK
The UCM6100 can be upgraded via TFTP/HTTP/HTTPS by configuring the URL/IP Address for the
TFTP/HTTP/HTTPS server and selecting a download method. Configure a valid URL for TFTP, HTTP or
HTTPS; the server name can be FQDN or IP address.
Examples of valid URLs:
firmware.grandstream.com
The upgrading configuration can be accessed via Web GUI->Maintenance->Upgrade.
Upgrade Via
Firmware Server Path
Firmware File Prefix
Firmware File Suffix
Firmware Version 1.0.7.11
UPGRADING AND MAINTENANCE
Figure 123: Network Upgrade
Table 84: Network Upgrade Configuration
Allow users to choose the firmware upgrade method: TFTP, HTTP or
HTTPS.
Define the server path for the firmware server.
If configured, only the firmware with the matching encrypted prefix will be
downloaded and flashed into the UCM6100.
If configured, only the firmware with the matching encrypted postfix will
UCM6100 Series IP PBX User Manual
Page 221 of 233