Table of Contents
Advertisement
AdJustmg the system parameters
MEMORY PROTECT
You can protect the settings you saved in the system memory of this unit from being
accidentally erased or unwantedly changed.
NEt'10F.:'r' F'F.:OTECT
::
ON,OFF
MAX VOLUME
You can set the maximum volume level so that this unit will not output sound beyond the
limited volume level.
MAX, 99 to 01, MIN
Control step: I
t'l~::'::
J.,./OLUNE SET
TURN ON VOLUME
You can set the initial volume level when the power of this unit is turned on.
TUF.:N ON '.,./OLUNE
-
;
!::
-
::
MAX, 99 to 01, OFF
Control step: I
MONITOR CHECK
Use this feature to activate or deactivate the monitor check function of this unit. When this
parameter is set to "YES", this unit receives the information on the available video signal
resolutions from the video monitor connected via HDMI (see page 18). If your TV monitor is
not compatible with 1080i and/or nop of resolutions, you cannot select "1080i" and/or
"nop" in "UP-SCALING" (see page 84).
NON I TOF.: CHECK
DEMO MODE
You can test the sound beam output from this unit to experience the sound beam.
YES, SKIP
If you change the setting of
"MONITOR CHECK",
"UP-SCALING" is
automatically set to "OW'
(see page 87).
ON, OFF
PANEL INPUT KEY
You can disable the INPUT on the front panel when you adjust the system parameters.
P~NEL
INPUT KEY
jl
Disabling the front panel keys
You can disable the front panel keys except when you adjust the system parameters.
ON,OFF
ON, OFF
F.
F'~NEL
KE'r'
92
En
Advertisement
Table of Contents
