Table of Contents
Advertisement
MANUAL SETUP
•
HOMI SET (HOMI settings)
Use to change the HDMI audio/video output/input to
match the connected component.
Choices: SUPPORT AUDIO (Support audio),
AUDIO SELECT (Audio select),
VIDEO INFO (Video information),
UP-SCALING (HDMI up-scaling),
ASPECT RATIO (HDMI aspect ratio),
HDMI CONTROL (HDMI control)
,. a)SUPPORT RUDro
b)RUDIO SELECT
c)UIDEO HlFO.
d)UP-SCRLHIG
e)RSPECT RRTIO
f)H[lm cmnROL
[.aJ/[1'J: Up/Down
[HnERJ: Enter
SUPPORT AUDIO (Support audio)
Use to select whether to play back HDMI audio signals on
this unit or on another HDMI component connected to the
HDMI OUT jack of this unit.
Choices: YSP-3050, OTHER
a)SUPPO~:T RUDIO
~YSP-3050
OTHER
[-<4)/[~):
Select
[ENTER):Return
• This setting is effective when HDMI CONTROL is set to OFF
(see page 85).
• The HDMI video signals input at one of the HDMI IN jacks of
this unit are always output at the HDMI OUT jack of this unit.
• When HDMI CONTROL is set to ON, this setting is ineffective.
This unit follows the setting of the HDMI control-compatible
TV.
AUDIO SELECT (Audio select)
Use to select whether to use the signals input at the HDMI
IN jack, with respect to the audio signals of the device
connected to the HDMI jack.
When only two channels of the multi-channel audio
signals input at the HDMI IN jack are output, connect this
unit and the player via an optical or coaxial digital
connection, as well as the HDMI connection, and set
AUDIO SELECT to OFF. The audio signals are output
from this unit in multi-channel via the connected optical
or coaxial digital jacks.
Choices: ON, OFF
84
En
b)RIJDIO SELECT
,. HDm 1
HVSTB··· • • • • •• ml
<T1J/STB)
HDMI2
DUD··········· ON
(DUD
)
[.a)/[1'):
Up/Do~jn [-<4J/[~):
Sel
[ENTERJ:Return
• The video signal input at the HDMI jacks is output, regardless
of the AUDIO SELECT setting.
• The AUDIO SELECT setting is applied only to the sound
output from this unit. It is invalid when the sound is output from
the device connected to the HDMI OUT jacks.
VIDEO INFO (Video information)
Use to display the video information of the current input
signal.
Choices: HDMI SIGNAL, HDMI RES., HDMI ERROR
,. HDM! SIGNRL···HDMI -) HDMI
HDMI RES.····1080P -) 1080P
HDMI ERROR···----
[.a)/[1'):Up/Down
[ENTER): Return
• Select HDMI SIGNAL to display the type of the
HDMI input/output signals.
• Select HDMI RES. to display the resolution of the
HDMI input/output signals.
• Select HDMI ERROR to display the error message for
HDMI sources or devices connected
(see page 102 for details).
UP-SCALING (HDMI up-scaling)
Use this feature to activate or deactivate the HDMI up-
conversion of the analog video signals input at the
composite video and component video jacks so that the
up-scaled analog video signals are output at the HDMI
OUT jack. This unit up-scales the analog video signals as
follows:
• 480i (NTSC)/576i (PAL)
~
480p (NTSC)/576p (PAL),
I080i or nop
• 480p (NTSC)/576p (PAL)
~
1080i or
nop
Choices: OFF, THROUGH, 480p (or 576p), 1080i, nop
d)UP-SCRLIHG
HDm UP-SCRLHIG·· THROUGH
[-<4J/[~J:Select
[E~nER
J: Ret'.lrn
Advertisement
Table of Contents
