Table of Contents
Advertisement
II
Enjoying surround sound
Enjoy TV or DVD digital audio in surround sound.
FOIlIlstruetoonS on how to operate or sel your TV or DVD playerlrecoroer, refer to the owner's manual supplied wIth each component
Enjoying DVDs in surround sound
o
Select the DVD video input on
your TV.
-
...
•
Set the operation mode selector to
YSP
This unit switches [0 the Y5P operation mode.
-
...
•
1) Press DVD on the remote
control of this unit.
This um! SWitches to the DVD playback mode.
Enjoying TV in surround sound
o
Select the TV channel using the
remote control supplied with your TV.
Mute the volume on
the
TV
-
...
•
Set the operation mode selector to
YSP
ThiS unit switches to the YSP operation mode.
-
...
•
Press TV on the remote control of
this unit.
This unit SWitches to the TV playback mode.
2) Play back the supplied demonstration
DVD on the DVD player/recorder.
~
..,
o
Check the digital signal being output at this unit.
The input channel indicators (see page 8 in the Owners Manual) are lit in the Iront panel display. and they
SWitch according to the channel composition of the corresponding Input source. If the sound IS OUlpullrom your
TV:>pl ·Lker.< mute the volume on your TV For details about digital audio mput signals, see page 58 In the
Owner's Manual.
-
...
e
Press VOLUME +/- on the remote control to adjust the
volume level of this unit.
-
...
o
Press one of the beam mode buttons on the remote control to
select the desired beam mode.
Select one altha SIX beam modes that besl matches the current input source of this uni!.
For further intormalion on the beam modes. see pages 56, 57, 62. 63 and 64 in the Owner's Manual.
Input
channel Indicators
L C "
5Il.
SIl--
'"
~,
_.
!.+
+
~-
-
To line-lune the listening environment parameters manually or make advanced settings for speaker positions, sound
beams, etc., see "MANUAL SETUpM on page 74 in the Owner's Manual.
Advertisement
Table of Contents
