Table of Contents
Advertisement
Connections
For audio connection, connect the coaxial digital output jack on your DVD player/recorder to the DVD COAXIAL
DIGITAL INPUT jack on this unit. When you connect this unit to your DVDNCR combo player/recorder, connect the
analog audio output jacks on your DVDNCR combo player/recorder to the AUX I AUDIO INPUT jacks on this unit in
addition to the coaxial digital audio connection. Connect the optical digital output jack on your tuner (digital satellite,
cable TV or digital airwave) to the TVlSTB OPTICAL DIGITAL INPUT on this unit.
For video connection, connect the component video output jack of your DVD player/recorder to the COMPONENT
VIDEO INPUT jacks on this unit. Connect the video output jack on your tuner (digital satellite, cable TV) to the STB
VIDEO INPUT jack on this unit.
Connect the HOMI input jack on your TV to the HOMI OUT jack.
,I,
~,,~
To prevent the optical cable from being unplugged, affix the optical cable in the supplied cable clamp (see page 17).
• Check that your DVD player/recorder is properly set to output Dolby Digital and DTS digital audio signals. If not, adjust the system
settings of your DVD player/recorder. For details, refer to the operation manual supplied with your DVD player/recorder.
• If your DVD player/recorder does not have a coaxial digital output jack, connect the analog audio output jacks on your DVD player/
recorder to the AUX I AUDIO INPUT jacks on this unit.
Rear panel of this unit
----------------------
,..---..,
TV
HDMI
Input
HOIII
-~
•
C oaxial
digital
output
DVD player/recorder
[A]
Optical
digital
output
~
~
Video
output
Digital satellite tuner, cable TV tuner,
digital airwave tuner, or game console
AUX 1
TVISTB
••
«8.
AUDIO INPlIT
OllT
VIDEO INPUT
VIDEO
COMPONENT
AudiolVideo
o
HDMlcable
Video
o
OSD video pin cable
o
Component video pin cable
;8
Optical cable
Digital audio pin cable
•
19
En
Advertisement
Table of Contents
