Table of Contents
Advertisement
Connections
If your component supports optical digital connections, connect the optical digital output jack on your component
(e.g., DVD player/recorder) to the AUX I OPTICAL DIGITAL INPUT jack on this unit. If your component does not
support optical digital connections, connect the coaxial digital output jack on your component to the AUX 2 COAXIAL
DIGITAL INPUT jack on this unit.
If your component does not support any digital connections, connect the analog audio output jacks on your component
(e.g., VCR) to the AUX I AUDIO INPUT jacks on this unit.
~\
.....
To prevent the optical cable from being unplugged, affix the optical cable in the supplied cable clamp (see page 17).
If you make analog and digital audio connections at the same time as shown in the illustration below, the digital audio signals input at
the AUX I OPTICAL DIGITAL INPUT jack take priority over the analog audio signals input at the AUX 1 AUDIO INPUT jacks.
Rear panel of this unit
DIGITAL INPUT
AUX2
DVD
COAXIA1.~
AUDIO INPUT
OUT
VIDEO INPUT
VIDEO
COMPONENT
~~
~
~
R
•
L •
(6
~
•
Analog audio
Coaxial
°fctlcal
Video
output
digital
d gltal
input
output
output
DVD player/recorder, VCR,
game console, CD player, etc.
Video signal to the TV
TV
Video
o
OSD video pin cable
Audio pin cable
Optical cable
Digital audio pin cable
20
En
Advertisement
Table of Contents
