Table of Contents
Advertisement
3
Press
~
I
~ to adjust the channel volume.
Control range: -10.0 dB to + 10.0 dB
4
Wait for a few seconds without operating this
unit when you have completed your
adjustment.
• All channel levels cannot be adjusted when the 2-channel or 5-
channel stereo playback (see page 62), or My Surround (see
page 57) is selected as the beam mode.
• "FRONT LIR" cannot be adjusted when Stereo plus 3 Beam is
selected as the beam mode (see page 57).
• Only CENTER can be adjusted when My Beam is selected as
the beam mode (see page 63).
• "FRONT LIR" are automatically adjusted depending on the
settings of the other channels when Stereo plus 3 Beam or
stereo playback is selected as the beam mode (see pages 57 and
62).
~,¥-:.
If the level of a particular channel cannot be adjusted, "- -dB"
appears in the front panel display.
Adjustmg the audio balance
89
En
•
Advertisement
Table of Contents
