Setting the Paper Type for the MP Tray
You can set the paper type you use on the MP tray after you set MP TRAY to 'USE'.
2
Data
Registration
OK
OK
OK
2-26
Using the MP Tray
7
Press
(Stop) to return to the Standby mode.
1
Open all three one-touch speed dialing panels
Registration]
press [OK].
If necessary, see steps 1 to 3 of "Turning the MP Tray ON/OFF and Setting the
Paper Size", on p. 2-25.
2
Press [ ] or [ ] until <4. PAPER TYPE> appears
PAPER SETTINGS
4.PAPER TYPE
3
Press [ ] or [ ] to select <PLAIN PAPER>, <HEAVY PAPER>,
<THIN PAPER>, or <HEAVY PAPER H>
<PLAIN PAPER>:
<HEAVY PAPER>:
<THIN PAPER>:
<HEAVY PAPER H>: Select when using heavyweight paper and you realize
PAPER TYPE
PLAIN PAPER
4
Press
(Stop) to return to the Standby mode.
[ ] or [ ] until <1.PAPER SETTINGS> appears
PAPER TYPE
Select when using plain paper.
Select when using heavyweight paper.
Select when using thin paper, such as tracing paper.
that the quality of printouts is poor using <HEAVY
PAPER>.
ADDITIONAL FUNCTIONS
2.COMMON SETTINGS
press [Data
press [OK].
PLAIN PAPER
press [OK].