Read Before Installation - Swann DVR4-1200 User Manual

Read Before Installation

• Do not expose the DVR to moisture. Water is the arch-enemy of electrical
components and also poses a high risk of electric shock.
• Avoid dusty locations. Dust has a tendency to build up inside the DVR case,
leading to a high risk of failure or even fire.
• Only install the DVR in a well ventilated space. The circuitry and hard
drive in the DVR, like all electronic devices, produce heat, and this heat needs
a way out.
• Do not open the DVR case except to install/swap the hard drive inside. There
are no user serviceable parts inside.
• Never open the case whilst the DVR is plugged in, and never turn the
DVR on whilst the case is open.
• Use only the supplied power adaptor. Other adaptors may cause damage
to the DVR or cause a fire.
• Do not cut or modify any cable for any reason. Doing so will void your
warranty, as well as pose a great risk of fire or electrical shock.
• Don't expose the DVR to sudden bumps or shocks (for example, being
dropped). The DVR is as robust as possible, but many of the internal components
are quite fragile.
• Remember that the DVR is, in all likelihood, going to be left on 24 hours a day,
7 days a week. Keep this in mind when choosing a location for installation.
IMPORTANT GUIDELINES
5