The Camera (Display Setup) Menu - Swann DVR4-1200 User Manual

The Camera (Display Setup) Menu

The DISPLAY SETUP MENU
of the DVR. In this picture,
the mouse cursor is
currently highlighting the
CH1 title field.
Naming Channels
You can change the name of any channel from the default (and rather drab) "CHx"
to anything that you would like (provided it's short enough to fit in the box). A
descriptive name on each channel often makes it easier to remember what camera
is where, and which channel would have captured an event you might be looking
for.
Title: The name that will be displayed over the image from a channel. Simply
highlight this box and enter the new name you would like.
Position: Where the title of the channel is displayed on screen. You can choose
any of the four corners of the display (UPLEFT being the top left-hand corner, and
DOWNRIGHT being the lower, right-hand corner).
AUTOSEQ (Auto-Sequence)
When AUTOSEQ (automatic sequencing mode) is
engaged, the DVR will automatically cycle through all
available channels, displaying each in turn expanded to
fill the entire screen.
In the AUTOSEQ drop-down menu, you can select how
long you'd like each channel to appear, as well as the
quad-view mode. Each can be configured individually,
so you can fine tune exactly how long you'd like each
channel to be visible for. The DVR will skip channels
which been disabled during the auto-sequence.
16
Remember: After making changes to the settings press/click the APPLY button.