Related Manuals for Swann REMOTECAM DVR-410
Summary of Contents for Swann REMOTECAM DVR-410
-
Page 1: Operating Instructions
Advanced security made easy RemoteCam™ DVR-410 Operating Instructions SR361-RMC www.swann.com MRMC301110T... -
Page 2: Table Of Contents
English Table of Contents FCC Verification: Before You Begin NOTE: This equipment has been tested and found to comply with the limits for Table of Contents Class B digital device, pursuant to part 15 of the FCC Rules. These limits are de- Package Contents signed to provide reasonable protection against harmful interference in a residen- tial installation. -
Page 3: Overview
Overview Operating Guidelines These are just a couple of points to keep in mind whilst using the RemoteCam: Congratulations on your purchase of the RemoteCam, a miniature self-contained digital video recorder which, as the name suggests, looks like a remote control. •... -
Page 4: Layout
Layout LED: A small orange light which will indicate the current state and function of the RemoteCam. In bright light (such as sunlight) this might be difficult to see. Additional Buttons Mini USB Port: A Mini-USB-A port. Use the supplied USB cable to attach the RemoteCam to a computer or USB charger. -
Page 5: Turning On The Remotecam
Turning on the RemoteCam Operating the RemoteCam To Capture a Photograph: To turn the RemoteCam ON: • Press and hold the Power Button for approximately one second. When you use the RemoteCam to take a photograph, you’ll be capturing a single •... -
Page 6: Setting The Date And Time
Setting the Date and Time Shooting Guide You can setup the RemoteCam to print the date and time that a recording was Framing: taken directly onto the video, like a watermark. To enable this function, you’ll just The RemoteCam has a fixed lens (a vari-focal lens would, simply, not fit) – so the need to set the time and date - the RemoteCam will keep track of it from there. -
Page 7: Connecting To Your Pc
Connecting to your PC Using the RemoteCam as a WebCam You can read the data on the microSD card in the RemoteCam by connecting You can use the RemoteCam as a webcam. To do so, you’ll need to grab the the RemoteCam to your computer. -
Page 8: Troubleshooting
Troubleshooting Technical Specifications Video Problem: I’ve recorded videos, but the microSD card seems to be blank. Video Format Solution: Chances are that this problem is caused by turning the RemoteCam off Video Resolution 720 x 480 before the video files have been properly saved to the microSD card. Always use Video Size Variable (avg. - Page 9 Any unit which proves defective during the stated period will be repaired without charge for parts or labour or replaced at the sole discretion of Swann. The end user is responsible for all freight charges incurred to send the product to Swann’s repair centres.