Figure 2-19. Removing The Video Pca - HP OmniBook XE3 Service Manual

4. Remove all three retaining screws from the PCA, and carefully lift it off of the connectors
underneath it.
Reassembly Notes
• Set the DIP switches on the new PCA to match the settings from the PCA you are replacing and
the notebook's display type. See "Installing a New Display Assembly" on page 2-19.
2-26 Removal and Replacement
Screws,
M2.5x4 mm

Figure 2-19. Removing the Video PCA

HP OmniBook XE3