Setting Up - Pioneer RSM300 Operation Instruction Manual

Setting up

Using the subwoofer
You can use the sound of the subwoofer to enhance the bass.
¥ ¥ Connection of the front speakers
Connect the speaker cables to the front speaker
terminals.
Connect the black end of each wire to the terminals
marked - (minus) and the other end to the terminals marked
+ (plus).
ø ø Connection of the subwoofer
Connect the subwoofer cables to the subwoofer
terminals.
Connect the black end of each wire to the terminals
marked - (minus) and the other end to the terminals marked
+ (plus).
π π Fit the AM loop aerial to its stand
Connect the AM loop aerial to the unit.
[ [ Connect the FM aerial
The reception will be at its best when the two loose ends
of the aerial are in a straight line and horizontal.
" " Plug the power plug into a wall socket
Be careful of the following
Be careful to make sure children not to put their hands or any objects into the
*speaker duct.
*speaker duct : A hole for plentiful bass sound on speaker cabinet(enclosure).
4
[ [
(FM - aerial)
π π
- optional
(AM - aerial
[subwoofer]
Front (L)
Subwoofer
Front (R)
NOTES :
• Do not connect the supplied speakers to any amplifier other
than the one supplied with this system. Connection to any
other amplifier may result in malfunction or fire.
• If TV screen becomes discolored do not place speakers
within 30cm from TV.
• Be sure to match the speaker cord to the appropriate
terminal on the components : + to + and – to –. If the cords
are reversed, the sound will be distorted and will lack base.
)