Listening To The Radio; Listening To Cassette Tapes - Pioneer RSM300 Operation Instruction Manual

Listening to the radio

Make sure both the FM and AM aerials are connected.
1. Select either FM or AM
2. Select the radio station
3. To 'save' a radio station: A preset
number will show in the display.
4. Select the preset number
5. To confirm press: Up to 50 radio
stations can be saved.
6. To select a 'saved' station
Listening to the radio - More you can do
Looking for radio stations automatically
1 Press and hold TUNE + / TUNE - for more than 0.5 second.
2 The tuner will scan automatically and stop when it finds a radio station.
Deleting all the saved stations
1 Press and hold PROGRAM/MEM on the remote control for two seconds.
"ERASE ALL" shows.
2 Press PROGRAM/MEM on the remote control to erase all the saved stations.
Improving poor FM reception
Press 3 / 8 (MONO/ST) on the remote control.
8
ON UNIT ON REMOTE
TUNER FUNCTION
TUNE + / TUNE - TUNE + / TUNE -
- PROGRAM/MEM
PRESET - / PRESET + FOLDER PRESET
- PROGRAM/MEM
PRESET - / PRESET + FOLDER PRESET

Listening to cassette tapes

Cassette tapes can be played back in this unit.
1. Open the tape door
2. Insert the tape
3. Close the tape door
4. Select the TAPE function
5. Start the tape playing
6. To stop a tape playing
Listening to cassette tapes - More you can do
Playing Fast backward or Forward
Press 41 / ¡¢ (4 / ¢ on the remote control ) on the unit during
playback, or stop, press 3 at a point you want.
Dubbing
This function shows how to record from tape to tape
1 Press TAPE to select tape function.
2 Insert the tape as follows.
TAPE1 - Insert a playback tape to dub.
TAPE2 - Insert a blank tape.
3 Press DUBB "DUBBING" shows. Dubbing starts.
4 To stop dubbing, press 7 STOP.
NOTE: In case you use the tape for the first time push the PUSH OPEN to open
the tape door and then remove the cushion in it.
ON UNIT ON REMOTE
PUSH OPEN -
- -
PUSH OPEN -
TAPE FUNCTION
3 3/8
7 STOP 7