Setting The Clock - Pioneer RSM300 Operation Instruction Manual

Setting the Clock

1. Press for at least 2 seconds
2. Choose from either AM 12:00 (for an am and pm
display) or 0:00 (for a 24 hour display).
3. Confirm your selection
4. Select the hours
5. Press
6. Select the minutes
7. Press
The setting is finished.
Using your player as an alarm clock
1 Press and hold TIMER. Each function, EX) TUNER, CD.... flashes.
2 Press SET when the function you want to be woken by is showing. If you
choose TUNER, "PLAY" and Then "REC" flashes in the display window
alternately.
3 Choose one of them by pressing SET.
4 "ON TIME" will be displayed. Then you can set the time you want the alarm to
go on. Press 41 / ¡ ¢ to change the hours and minutes and SET to
save.
5 "OFF TIME" will be displayed. Then, you can set the time you want the
function to stop. Press 41 / ¡¢ to change the hours and minutes and
press SET to save.
6 You will be shown the volume (VOL) you want to be woken by. Use
41 / ¡¢ to change the volume and SET to save. Switch the system
off. The clock icon " "shows that the alarm is set.
7 When the system is turned off, you can check the time the alarm is set for by
pressing TIMER. You can also turn the alarm on and off by pressing TIMER.
12
Setting the asleep time
1 Press SLEEP repeatedly to select delay time between 10 and 180 min-
ON UNIT utes, after the unit will be turned off.
2 To check the remaining time, press SLEEP.
CLOCK
41 / ¡¢
DEMO
1 Press USB/DEMO in power off state to demonstrate the function on dis-
SET
play window.
41 / ¡¢
2 To cancel it, press
SET
DIMMER
41 / ¡¢
Press SLEEP once. The LED (Light-emitting diode) of front panel is turned
SET
off and the display window will be darken by half. To cancel it, press SLEEP
repeatedly until dim off.
or this button again.