Check The Router System Information - TRENDnet TEW-818DRU User Manual

TRENDnet User's Guide
1. Log into your router management page (see
on page 17).
2. Click on the Advanced tab.
3. Click on the Administrator section and click on Settings Management.
4. Click the WAN Ping Respond drop-down list and select Enabled to allow ping requests
from your router to the Internet. Click Apply to save settings.
5. To save changes, click Apply.
Note: If you would like to discard the changes, click Cancel before you click Save.

Check the router system information

Advanced > Administrator > Router Status
You may want to check the system information of your router such as WAN (Internet)
connectivity, wireless and wired network settings, router MAC address, and firmware
version.
1. Log into your router management page (see
on page 17).
© Copyright 2014 TRENDnet. All Rights Reserved.
"Access your router management page"
"Access your router management page"
2. Click on the Advanced tab.
3. Click on the Administrator section and click on Router Status.
System Info
• Firmware Version: The current firmware version your router is running.
• System Time: The current time set on your router.
• Router Up Time: The duration your router has been running continuously
without a restart/power cycle (hard or soft reboot) or reset.
TEW-818DRU
55