Manually Configure Your Internet Connection; Clone A Mac Address - TRENDnet TEW-818DRU User Manual

TRENDnet User's Guide
future reference or configuration such as virtual server (also called port forwarding, see
"Virtual Server" on page 35) or special applications (also called port triggering, see
"Special Applications" on page 36).
1. Log into your router management page (see
on page 17).
2. Click on the Advanced tab.
3. Click on the Setup section and click on LAN Setting.
3. Review the DHCP reservation settings. Click Apply to save settings.
• Hostname: Enter a name of the device you will assign the DHCP reservation rule.
• MAC Address: Enter the MAC (Media Access Control) address of the computer or
network device to assign to the reservation. (e.g. 00:11:22:AA:BB:CC)
• IP Address: Enter the IP address to assign to the reservation. (e.g. 192.168.10.101)
• Enable: Check the Enabled option to enable the reservation.

Manually configure your Internet connection

Advanced > Setup > WAN Setting
© Copyright 2014 TRENDnet. All Rights Reserved.
"Access your router management page"
1. Log into your router management page (see
on page 17).
2. Click on the Advanced tab.
3. Click on the Setup section and click on WAN Setting.
4. In the WAN Connection Type drop-down list, click the type of Internet connection
provided by your Internet Service Provider (ISP).
5. Complete the fields required by your ISP.
6. Complete the optional settings only if required by your ISP.
7. To save changes, click Apply.
Note: If you are unsure which Internet connection type you are using, please contact
your ISP.

Clone a MAC address

Advanced > Setup > WAN Setting
On any home network, each network device has a unique MAC (Media Access Control)
address. Some ISPs register the MAC address of the device (usually a router or a
TEW-818DRU
"Access your router management page"
25